Interior structure
All of the four outer side panels can be easily pulled off with a little force. The integrated dust filter could theoretically be removed or cleaned together with the panel. Fast access is ensured in any case.
To prevent the side parts from being mixed up, an “L” or “R” is stamped in the bottom corner of each one. But you should also notice that something doesn’t fit properly. And so “naked” the case looks surprisingly empty in the view from the front and back. In addition to the already installed power supply, there is still room for a single 3.5″ HDD.
However, there is no lack of stability, which is ensured by the various holders and covers in the sides. The ITX mainboard will later be placed underneath the power supply, and two 2.5″ SSDs or HDDs can be attached to the left of it.
On the opposite side is a pivoting frame for up to two 140mm fans or a 280mm radiator.
I removed the included power supply, which is a SFXL-A700GD-IBP. Unfortunately I couldn’t find out who the actual manufacturer is, a few years ago iBUYPOWER still used High Power.
Connectors available are 24-pin ATX, 4+4-pin EPS/CPU, 2x 6+2-pin PCIe/GPU, 1x 6-pin PCIe/GPU as well as 4x SATA and a Molex connector.
However, the Fake 80PLUS Gold seal, which has a small “Ready” added as well as a different color, does not inspire much confidence.
At best, a “would get 80PLUS Gold, but we want to save the cost of the seal”. In the worst case, a “we’ll just put something on it”. Very bland aftertaste for the advertised price for the combination of case and power supply.
13 Antworten
Kommentar
Lade neue Kommentare
Urgestein
Neuling
Neuling
Moderator
Neuling
Moderator
Urgestein
Moderator
Urgestein
Neuling
Mitglied
Alle Kommentare lesen unter igor´sLAB Community →