Measuring tool
This remains the SpyderX from Data Color. Portrait Displays officially lists this as supported hardware for Calman Ultimate. The SpyderX Elite can measure up to a maximum of 2,000 nits (very suitable for HDR) and the “Black Level”, the lowest luminance (black value), is 0.02 nits. This is sufficient for LCD panels. This is more difficult for OLED panels, where the contrast value will not be correct in case of doubt. Since OLED panels basically have an infinite contrast (the pixels turn off completely), the measured value (for OLED) is negligible in case of doubt.
The upper image shows the measurement of an OLED panel and at the same time the measurement limit of the SpyderX Elite. We remember: Black is not a color, black is the absence of light!
Incorrect colors on the monitor – Calibrate or despair? | The SpyderX Elite quick Review
Measurement setup
The SpyderX is placed in the center of the display. The SpyderX is connected to my test bench via USB and is controlled by the Calman Ultimate software. Each monitor is reset to the factory settings before measuring and warmed up for at least 30 minutes – in the sense of being connected and switched on.
25 Antworten
Kommentar
Lade neue Kommentare
Urgestein
1
Urgestein
Moderator
Veteran
Veteran
Moderator
Veteran
Moderator
Mitglied
Veteran
1
Moderator
Mitglied
Moderator
Veteran
Mitglied
Moderator
Mitglied
Alle Kommentare lesen unter igor´sLAB Community →