Options and settings
The latest Powenetics app can be found at Aris on the Google Drive. There is no installer, so you just copy the RAR file somewhere and unzip the files. But I already wrote that.
After connecting Powenetics to one’s system and also connecting the USB cable, find the “Powenetics.exe” and run it. Then one follows the steps described below. Then one goes to the Options page:
Now in the connection options one selects the com port to which Powenetics is connected. You will be notified as soon as you click the “Open” button if it is not the right one after all. Once you have found the right port, you simply click “Save” so that it is preselected when you open the app. Now that one has pressed “Open”, the name of the button changes to “Close” for obvious reasons.
To start the data flow, one must now click on “Start” in the lower right corner of the app.
In this dropdown menu, amn can select lower speeds if the full speed, i.e. 1000 readings per second, is not needed. One should choose lower speeds for recordings of more than 5 minutes, otherwise the log files will become very large!
In the “Screenshot Mode” one can choose where the app takes the data from to store it in the screenshot and log folders.
If one should feel that something is wrong, one can activate the “Debug” mode to receive notifications. One can then send these notifications to Aris us to check and fix possible problems.
The “Calibration” mode is intended for advanced users. We will be introducing this feature shortly, but be careful! You must calibrate the PMD with ONLY calibrated equipment! Otherwise the measurements will not be correct. The PMD is already calibrated at the factory, so you should not use this option for a year or more after you receive the board and start using it. We could also provide a calibration option as we have calibration equipment in the Cybenetics lab.
22 Antworten
Kommentar
Lade neue Kommentare
Urgestein
Mitglied
1
Mitglied
Urgestein
1
Mitglied
Urgestein
1
Urgestein
1
Urgestein
Urgestein
1
Urgestein
1
Veteran
Urgestein
Mitglied
Alle Kommentare lesen unter igor´sLAB Community →