CPU Pro Reviews Workstations

Core i9-12900KF, Core i7-12700K and Core i5-12600 in a workstation test with amazing results and an old weakness | Part 2

Power consumption and efficiency in mixed workloads

This is where AutoCAD comes in handy, because there are no performance-hungry rendering interludes. The CPU load is usually below 70 percent, often enough even lower, which reflects the normal workday quite well. Also, the Cadalyst run is fairly consistent, including power consumption on systems of varying speed. The Core i5-12600K takes them all and is even slightly below the Ryzen 5 5600X, but then the i7-12700K follows, with the Ryzen 7 5800X breathing down its neck. The i9-12900K can be found in the good midfield, whether with or without a blown up PL1.

Once again, you can put the score in relation to the power consumption in order to map the efficiency. The Core i9-12900KF is even 71 percentage points more efficient than the Ryzen 9 5950X. I’d rather not even write anything about the Core i5-12600K.

Full power during rendering

Here, the Core i9-12900KF is naturally at the very end and also behind the faster Ryzen 9 5950X. The i9-12900K, which I manually slowed down to 125 watts for PL1, on the other hand, collects in the midfield, because the gulping orgy is history after less than a minute. And it right now the best time to give Intel an earful for the aberrant PL1 at 241 W.

 

The layman is amazed and the expert is surprised. In fact, without the unlocking skills from Pat’s PL1 magic booth, the i9-12900KF is the most efficient CPU! All this was probably only because someone wanted to attack AMD’s many-cores in their very own field and so the Alder Lake now has to be brought to the boil by force. If you were to run all of these CPUs as originally planned in the specs, you would be a bit further behind in rendering, but not completely beaten. For this, the ecological factor would be priceless. Maybe we’ll see Fridays for real PL1 sometime, then the power outlet will have a breather while rendering.

 

Kommentar

Lade neue Kommentare

Z
Zazz

Mitglied

15 Kommentare 3 Likes

Hi, you guys at IgorsLab are a lifesaver. A big thanks to you for this article. It would also be of highly interest to see if DDR4 vs DDR5 has any impact on the i9-12900 performance as well. Asking as many people, like me, have invested in 64-128GB DDR4 memory kits and it would be really interesting to see if one would still be able to use them with the i9-12900 without any performance penalty, in my case SolidWorks, or if it is worth investing in a new set of the much pricier DDR5.

A big thanks again,
Peter

Antwort Gefällt mir

Igor Wallossek

1

10,199 Kommentare 18,821 Likes

So let's wait for a 2nd run :)

But I need a short rest.

Antwort 1 Like

Z
Zazz

Mitglied

15 Kommentare 3 Likes

Great, Have your well earned rest :sleep:

Antwort Gefällt mir

Z
Zazz

Mitglied

15 Kommentare 3 Likes

Hi again, Any updates? Eager to see if DDR4 vs DDR5 has any impact on SolidWorks rebuild time as it is such pain in the ass :cool:

Antwort Gefällt mir

Z
Zazz

Mitglied

15 Kommentare 3 Likes

Going for DDR4 motherboard and the 12900K today as DDR5 memories aren't that easy to get around here, and must be imported, and i need the build now for my work. It will do till Raptor Lake enters the scene q3 next year and DDR5 and m.2 PCIe 5.0 are more matured.

Antwort Gefällt mir

Z
Zazz

Mitglied

15 Kommentare 3 Likes

Strange indeed. 12900K on a Gigabyte Z690i Aorus Ultra DDR4, all settings by default except for XMP.
My setup scores only 1.90 points in CPU Rebuild Composite compare to your 2.89. Huge difference indeed. So DDR5 seems yo speeds up rebuild time in SolidWorks dramatically. I tested to down clock my DDR4 to 2133Mhz only and rebuild time score surprisingly INCREASED to 2.04 points :-O
Other benchmarks are in line with other testers online...

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Igor Wallossek

Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel.

Computer nerd since 1983, audio freak since 1979 and pretty much open to anything with a plug or battery for over 50 years.

Follow Igor:
YouTube Facebook Instagram Twitter

Werbung

Werbung