Aircooling Case Reviews Watercooling

CORSAIR 2000D Airflow in review – Mini-ITX case with great airflow and a small issue

Gallery

 

Conclusion

Since we don’t have to go into the software for the non-RGB version of the case, we’ll get straight to the conclusion. The Corsair 2000D Airflow could shine in the test with excellent heat dissipation and generous space. The 3070 Ti used for the test with a TGP of about 300W only got marginally warmer in the approximately 24 liter ITX case than in the gigantic 7000D full tower and the 30 MHz lost as a result are not even measurable. Therefore, I can only praise the thermal behavior.

As far as the general workmanship, concept and space are concerned, I can’t report anything negative either. Everything is cleanly manufactured and looks stable, all openings are equipped with dust filters and the installation is also very easy thanks to the intelligent layout – however, there is not much room for cable management in the 2000D.

Award – Performance Booster

What I didn’t like at all is the positioning of the mainboard I/O. To insert the cables of keyboard, mouse, monitor etc. through the small opening and to break your fingers when plugging in the connectors is an absolute disaster. The thick display port cable is so kinked that I have to fear a short lifespan. If you think you can build a portable computer for LAN parties on the basis of the 2000D, I have to disappoint you at this point at the latest. Personally, I would rather lug the big 7000D with custom loop up to the third floor than break my fingers (or cables) connecting peripherals on every LAN. On the other hand, for a small desk or generally cramped space where the case remains stationary and doesn’t need to be portable, the 2000D is definitely a good choice.

The price of €124.90 is a bit of a mouthful, because apart from the fact that the case is made of much less material than a regular mid-tower and doesn’t have a glass panel, the non-RGB version doesn’t even come with pre-installed fans. It seems almost grotesque that the even more expensive RGB version with a price of 169.90€ almost has a more attractive price-performance ratio thanks to the included RGB fans and controller.

 

The case was provided by Corsair for this review. The only condition was compliance with the lock period, no influence or compensation took place.

 

Kommentar

Lade neue Kommentare

Steffdeff

Urgestein

735 Kommentare 696 Likes

Dankeschön für den Test !!!!😃😎😃
Um das Mini-ITX habe ich bisher einen großen Bogen gemacht, was sich jetzt ändern könnte!
Gibt es eigentlich Einschränkungen bei der GPU wenn man den Scythe Mugen verbauen möchte? Den hätte ich nämlich noch auf Lager!
Beim DisplayPort könnte sowas hilfreich sein:

Antwort 1 Like

Derfnam

Urgestein

7,517 Kommentare 2,029 Likes

LAN-Parties? Hmmm...
Egal. Bilder konnte ich nicht gucken, weil ich sofort spürte, wie mir Ekelpickel auf den Augäpfeln wuchsen, aber das bin sicher wie immer nur ich. Erinnert hat mich das Ding an einen ähnlichen Wachturm von - soweit ich das richtig erinnere - SilverStone. Alles schön geschlossen, nur oben und unten war ein Lüftereinbau möglich (Kamineffekt vielleicht?). Hatte Igor mal getestet.
Dass das nicht mehr dem der jetzigen Kundschaft oktroyierten Geschmack entspricht - geschenkt. Aber mal rein hypothetisch gefragt: 140er oder gar 180er Lüfter im Boden und die harte Ware eher aus den unteren Regalen pufft oben aus - das sollte doch auch flutschen, oder?

Antwort Gefällt mir

Alexander Brose

Moderator

824 Kommentare 576 Likes

Moin!

Ne, eigentlich nicht. Der Mugen ist ja genau so "breit" wie der Fera und hier kannst du sehen, dass beim Fera noch massig Platz bis zum PCIE-Slot übrig ist.

View image at the forums

Grüße!

Antwort 2 Likes

Lagavulin

Veteran

229 Kommentare 186 Likes

Vielen Dank für den Test und den Einbaubericht!

Das I/O-Shield an der Gehäuseunterseite ist auf den ersten Blick schon merkwürdig, wäre aber für mich die perfekte Lösung, wenn man einen frei im Raum stehenden Schreibtisch hat: So hat man eine „saubere“ Rückseite ohne sichtbare Anschlüsse und Kabel.
Toll finde ich auch, dass man lange (365mm!) Tripe-Slot-Grafikkarten einbauen kann.
Was für mich leider gar nicht geht ist, dass man vorne keine 25mm dicken Lüfter einbauen kann.

Antwort 1 Like

r
rokzo

Mitglied

54 Kommentare 13 Likes

Hey,
kann man einen Dark Rock pro 4 oder Noctua NH D15 einbauen?

Antwort Gefällt mir

S
SpotNic

Urgestein

954 Kommentare 396 Likes

Eine Frage am Rande, besteht die Möglichkeit die Galleryslides so einzustellen, dass sie einmalig durchlaufen und stoppen? Das macht einen Irre, mir sind die Anzeigezeiten zu kurz und bei jeder Gallery auf Pause zu drücken nervt irgendwie.

Antwort 2 Likes

LurkingInShadows

Urgestein

1,352 Kommentare 552 Likes

Wenn ne RTX 4xxx eingebaut wird kann man sich die 90° Adapter gleich mitkaufen, oder? Weil so ne Kurve wie auf dem Bild bringst ohne ja nicht zusammen....

Antwort 1 Like

T
TheSmart

Veteran

418 Kommentare 209 Likes

Also so rein optisch gefällt mir das Gehäuse recht gut.
Nur der Preis ist Corsairtypisch ein wenig zu hoch angesetzt.
Aber dies könnte ja dann noch der Markt regen die nächsten Monate.

Wobei ich mir aber am ehesten so ein Gehäuse mal wünschen würde im Design des Fractal North. Nur halt dann kein Midi, sondern ITX.
Das wäre echt mega geil^^

Antwort 1 Like

Tim Kutzner

Moderator

824 Kommentare 666 Likes

Hey, diese Wasserkühlung kommt mir bekannt vor!

Antwort 1 Like

H
Headyman

Veteran

116 Kommentare 53 Likes

ITX habe ich auch schon zweimal verbaut. Ist immer wieder lustig wie fast das gesamte Board unter einem großen Luftkühler "verschwindet"...
Und wenn man dann noch ein Kabel stecken muss...

Antwort 2 Likes

LurkingInShadows

Urgestein

1,352 Kommentare 552 Likes
onyman

Veteran

238 Kommentare 126 Likes

Interessantes Gehäuse. Ich mag es, dass es auch immer mal wieder alternative Aufbaukonzepte gibt. Nichts ist öder als immer wieder die gleichen Gehäuse mit Facelift anzubieten.

Und der Preis wird sich aus der Stückmenge ergeben. Ich kann mir nicht vorstellen, dass davon viele produziert werden. Dazu ist die Zielgruppe zu klein.

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Igor Wallossek

Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel.

Computer nerd since 1983, audio freak since 1979 and pretty much open to anything with a plug or battery for over 50 years.

Follow Igor:
YouTube Facebook Instagram Twitter

Werbung

Werbung