Due to the fact that all settings deliver usable results at maximum frame rate, we’ll take another look at all settings via VRR.
Variable Overdrive @ Default (120 – 60 Hz)
Response Times
Overshoot
Variable Overdrive @ AMA 1 (120 – 60 Hz)
Response Times
Overshoot
Variable Overdrive @ AMA 2 (120 – 60 Hz)
Response Times
Overshoot
Variable Overdrive @ AMA 3 (120 – 60 Hz)
Response Times
Overshoot
Unfortunately, the BenQ EX3415R does not offer a variable overdrive. BenQ could have made a mixture of AMA 2 and Default. This is a pity, because it would improve the balance between reaction time and overshoot considerably. My recommendation to all VRR users (60 – 144 Hz): AMA 2! With this setting, you at least get a single overdrive experience – across the entire VRR. For those who have a very potent GPU and thus permanently get over 100 FPS/Hz, they can leave the overdrive in the default. AMA 1 is a bit too slow at 144 Hz, but usable. With AMA 1, response times are sometimes too close to the refresh window or even significantly above it. This can lead to perceptible ghosting. Below 140 Hz, this no longer plays a role. And AMA 3? Well, if you want to see permanent inverse ghosting – you’re welcome to it. AMA 3 = unusable!
- 1 - Introduction, Features and Specs
- 2 - Workmanship and Details
- 3 - How we measure: Equipment and Methods
- 4 - Pixel Response Times
- 5 - Variable Overdrive
- 6 - Display Latencies and Blur Reduction
- 7 - Color-Performance @ Default Settings
- 8 - Direct Comparison
- 9 - Color-Performance calibrated
- 10 - Summary and Conclusion
21 Antworten
Kommentar
Lade neue Kommentare
Veteran
Moderator
Mitglied
Veteran
Urgestein
Moderator
Veteran
Veteran
Moderator
Veteran
Veteran
Veteran
Urgestein
Veteran
Veteran
Mitglied
Urgestein
Moderator
Moderator
Alle Kommentare lesen unter igor´sLAB Community →