Anyone who has ever built their own PC is spoiled for choice. Either a fan-based or water-based cooling solution. If you opt for the latter, the question is what kind of CPU water block you want to use. The company EK has presented two new water blocks that could entice some customers if they are prepared to spend an above-average amount of money [...]
- All AMD GPUs
- All NVIDIA GPUs
- Workstation GPUs
- Water- and Aircooling
- Tutorials and Basics
- CPU, RAM, Mainboard
- PSU Case & Modding
- Monitors & Displays
- WiFi & Ethernet
- PC-Audio & Accessories
- Memory & Storage
- Thermal paste
- Support us!
Search Results For - 1700
in today’s article, we have tested 10 water blocks, on 2 platforms, with 2 pump settings, each with different mounting variants. Today is not about theoretical values, but about real performance figures that every reader can measure themselves at home with a little effort. The background to all this is, of course, the initial review of the [...]
the Intel Alder Lake CPUs with their LGA1700 and Independent Loading Mechanism (ILM) including the bending problem have been around for 9 months now. The successor CPUs aka Raptor Lake might not be long away, but it has already been confirmed that they will use the same socket and thus most likely ILM as well. Existing motherboards with a 600 [...]
Intel’s Alder Lake CPUs with their LGA1700 and Independent Loading Mechanism (ILM) including the bending problem have been around for 9 months now. The successor CPUs aka Raptor Lake might not be long away, but it has already been confirmed that they will use the same socket and thus most likely ILM as well. Existing motherboards with a 600 [...]
The LGA1700 socket, which Intel introduced for the 12th generation of their Core CPUs last November, is known to have one or two problems with bending hardware. For context, I recommend our other two posts if you haven’t read them already. But in short, the problem is that the clamping force of the ILM (Integrated Loading Mechanism) is [...]
As promised, today we cover part 2 of the “Washermod”, in which we want to evaluate a few more combinations of different motherboards, socket manufacturers and coolers in a before and after test with the modification. To briefly summarize what the washer mod is all about: washers are installed between the motherboard and the ILM [...]
Disclaimer: The following article is machine translated from the original German, and has not been edited or checked for errors. Thank you for understanding!
Today I turn for the first time in detail to AMD’s upcoming Socket AM5 (version 2), as it will be used for the upcoming Raphael CPUs (Ryzen 7000). AMD consequently changes from the PGA (Pin Grid Array) with the contacts on the CPU to the much easier to handle LGA (Land Grid Array) because of the large number of required (1718) pins. After we [...]
Intel’s Alder Lake CPUs run hot, very hot. A few weeks ago, Igor had already identified the bending of the CPU and motherboard due to the LGA1700 socket as a potential cause for this. Today I’ll show you a simple modification that can gain up to 5 °C in CPU core temperatures, and it almost couldn’t be simpler. Thanks (again) to [...]
Cooling issues with Intel’s Alder Lake – Problems with the LGA-1700 socket and a possible workaround
Badly fitting coolers, too low performance with actually good waterblocks and bent CPUs – meanwhile not only the feedback of the readers is piling up, but also very similar reports from the board partners, cooler manufacturers and system integrators. Based on my own experiences, I went in search of clues and first tried to sort out [...]
