With our MoreClockTool (MCT) we want to logically round up the MorePowerTool (MPT) and the Red BIOS Editor (RBE) and replace the Wattman from AMD’s driver packages for simpler overclocking. Which also makes it clear that the MCT can only be used for newer AMD graphics cards. Even if our software seems rather manageable at first glance: all necessary functions are still on board, but you can do without the complete overhead as long as you don’t really need it. As the author of this tool, Hellm thus followed the community’s wish for a small, lightweight program that directly builds on AMD’s libraries, logically complements the MorePowerTool and in some respects is even significantly more user-friendly because many long paths can be shortened (and also modified).
We are starting the official hosting of the tool today, after some community activists eagerly tested it in a closed beta phase and already found the roughest blunders. Even though the interface is deliberately kept simple, there are highly complex things under the hood and the omnipresent bug devil is always present at such a party anyway. For this reason, the program is in constant development (also with regard to the next generation of AMD graphics cards), which is why I would also like to refer to the forum thread attached below.
But I would like to ask you to read the disclaimer before downloading and using the software, because the versions published here are not commercial software, but their use and overclocking is at your own risk. If you want to know more about the MorePowerTool, or if you don’t know it yet, we recommend this useful tool:
RED BIOS EDITOR and MorePowerTool for Polaris, Navi and Big Navi
DISCLAIMER – BE SURE TO READ!
- The software offered here for download free of charge is still in the test stage and makes no claim to full stability and functionality! It is the basis for broad testing by the community and is then transferred to new versions after passing through the tests and a final check and correction.
- The operation of the software represents a massive intervention in the regulation of the graphics card and its drivers! The use of the MCT, MPT and the RBE is exclusively at your own risk and under your own full responsibility. It may only be performed by experienced users for pure evaluation purposes! Only those who agree to the following terms and conditions may download and use this software.
- The publication igor’sLAB is not the author or commercial distributor of this software and therefore cannot assume any liability for the software, its use and the possible consequences of improper use. This also applies to possible program incompatibilities or data loss.
- Whoever uses the MCT, MPT or the RBE already agrees to these conditions in full when downloading and waives any claims arising from the consequences of the use.
- Permanent operation of the components with values not intended by the manufacturer can lead to irreparable damage! The protective functions (shutdown limits) are all still activated, yet other components can of course also suffer unforeseen damage!
- The software linked here in the article is a purely experimental intervention in the system and not intended with all settings for 24/7 use in production systems!
- The higher voltages that are now possible may damage or destroy the modified hardware in the short or long term.
- The software accesses settings of service or third-party programs, especially those of AMD Wattman. These data may be copyrighted materials of their authors.
If you agree with the disclaimer, you can download the current and older versions. There will also be a detailed changelog for each version if it is important.
253 Antworten
Kommentar
Lade neue Kommentare
1
Mitglied
Mitglied
Mitglied
1
Mitglied
Urgestein
Urgestein
Veteran
Urgestein
Veteran
Moderator
1
Veteran
Moderator
Veteran
Moderator
Urgestein
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →