Reviews SSD & HDD Storage Storage drives

BIWIN HP SSD EX950 M.2 2TB Review – TLC in fast and cost-effective

Synthetic benchmarks

I ran the values in CrystalDiskMark this time with a used SSD, which I filled to just under 80% and then deleted again. Sequential write rates of up to 3215 MB/s are still achieved, reading is even a bit faster with 3488 MB/s. Thus, the write speed is even clearly above the stated 2900 MB/s, only the read speed is not quite as fast as with the virgin SSD. But you only just miss the 3500 MB/s.

ATTO also shows a similar picture, even if you miss the read rates more clearly with the used SSD here. However, both values are still really respectable.

Application benchmarks

Using AJA, I create a simulated 4K video stream with decent data. When writing the stream, the average is pretty much at the promised 2900 MB/s. The very regular drops obviously always occur when the SDRAM is full. Then the SSD writes only with half speed for a short time, otherwise it is even up to 3178 MB/s

Reading in AJA is about 3200 MB/s, even here there are small “hangs” from time to time, but they don’t matter. Subjectively and with the measurement data, you do not have to hide from a Samsung 970 EVO, which is of course also a positive finding.

Now we come to the showdown in real applications from the workstation area and the direct comparison to the slightly more expensive Corsair MP400. Apart from the slight slip in icePack, the TLC SSD virtually dominates the counterpart with QLC at will. The measured values are not only, but also reflect the subjective feeling.

This trend also continues in reading, leaving icePack aside for a moment. However, some applications show extreme advantages over the Corsair SSD, once again calling its price into question. Or it makes the HP SSD seem particularly cheap, depending on how you look at it.

Summary and conclusion

The SSD is fast, quite cool and even after writing almost completely, it is still almost as performant when writing as it was when new. The warranty is fine, and the lack of price-boosting additions completely negligible. BIWIN will certainly not damage the Brand HP with this SSD, on the contrary. Even though there is no hardware encryption, the rest of the feature set is perfectly fine. It gets the buy tip for the good price/performance ratio, because 240 Euros for such a fixed 2 TB SSD are fair. If you don’t need a PCIe 4.0 SSD and still want to get the most out of your M.2 slot, you certainly won’t go wrong with HP’s SSD EX950.

From this point of view, BIWIN has done everything right and also priced the SSD quite attractively. In these times of really exorbitant moon prices, that’s saying something. I can only hope it stays that way.

 

Kommentar

Lade neue Kommentare

konkretor

Veteran

302 Kommentare 306 Likes

Klassiches OEM Produkt

Preis und Performance passen, 1400 TBW sind eine Ansage

Crucial ist mit seiner P2 SSD 2 TB bei nur 600 TBW

Antwort 1 Like

Case39

Urgestein

2,508 Kommentare 932 Likes

Das war jetzt interessant. Danke für das Review👍

Antwort Gefällt mir

D
Denniss

Urgestein

1,523 Kommentare 549 Likes

Bei Crucial wäre die P5 vergleichbar und die hat 1200 TBW

Antwort 1 Like

Timberwolf

Mitglied

33 Kommentare 13 Likes

Als Kauftipp würde ich eher die baugleichen NVMe SSD von Mushkin und ADATA nennen, welche auch noch 256Bit AES Hardwareverschlüsselung bieten und seit längerem auch deutlich günstiger zu erstehen sind:

Mushkin Pilot-E 2TB (MKNSSDPE2TB-D8)

View image at the forums

ADATA XPG Gammix S11 Pro 2TB, M.2 (AGAMMIXS11P-2TT-C)

View image at the forums

Klar die Muskin kommt mit einer kürzeren Herstellergarantie von nur 3 Jahren und keiner Software-Toolbox daher, aber es ist auch nicht außer acht zu lassen, dass man diese bereits schon deutlich unter 200€ erwerben konnte, was für eine 2TB NVMe mit DRAM Cache und TLC NAND schon mehr als nur ordentlich ist. Wie viel einem die zusätzliche Garantiedauer wert ist, ist natürlich jedem selbst überlassen.

Ansonsten wäre auch noch die ADATA XPG SX8200 Pro Modellreihe zu nennen, welche am Anfang ebenfalls auf das besagte Design mit dem Silicon Motion SM2262EN Controller gesetzt hat. Aktuell sind diese leider nicht mehr empfehlenswert, da ADATA ganz klamm und heimlich den Controller und den NAND ausgetauscht hat, was nun zur Folge hat, dass jetzt mehrere sich deutlich in der Leistung unterscheidende Revisionen am Markt sind: Not-So-Solid State: SSD Makers Swap Parts Without Telling Us

Antwort 2 Likes

Klicke zum Ausklappem
grimm

Urgestein

3,084 Kommentare 2,040 Likes

Ja, passt. Danke für den Test. Ich bin auf der Suche nach einer P/L Storage-Lösung als Datengrab (Bilder, Filme, Doks). Die hier ist ja fast schon zu schade, weil schnell.

Antwort Gefällt mir

Timberwolf

Mitglied

33 Kommentare 13 Likes

Dann würde ich empfehlen bei der Crucial P1 SSD 2TB (CT2000P1SSD8), sofern diese wieder im Angebot ist, zu zu schlagen. Diese ist immer wieder mal bei diversen Aktionen für um die 140-160 Euro zu haben: klick

Für den angedachten Einsatzzweck dürfte der QLC Speicher, mit seinen bekannten Vor und Nachteilen, trotzdem ausreichend sein.

Antwort 1 Like

D
Denniss

Urgestein

1,523 Kommentare 549 Likes

Die Vorteile von QLC (Preis) sind eher ab 4TB spürbar, bei kleineren Varianten obliegen eher die Nachteile da dort kaum ein günstigerer Preis vorkommt.

Antwort Gefällt mir

Igor Wallossek

1

10,211 Kommentare 18,898 Likes

Naja, nicht ganz. BIWIN fertig die Module mittlerweile selbst und kauft die Wafer zu.

Die Adata würde ich jetzt auch nicht mehr kaufen. Stichwort Clone-Warrior. Die war echt mal ein Tipp und ist jetzt die übliche Hama-Wundertüte. :D

Antwort 2 Likes

konkretor

Veteran

302 Kommentare 306 Likes

Danke Igor für das Detail, wenn sie die Wafer beziehen und dann selber schneiden und das Packaging machen dann ist natürlich kein OEM mehr.

Antwort Gefällt mir

Igor Wallossek

1

10,211 Kommentare 18,898 Likes

BIWIN hat sich mittlerweile eine eigene Factory hingezimmert. Da wird gescheit expandiert. :D
(Ich hatte ja auch den Link zur Herstellerseite mit im Text)

Antwort 3 Likes

S
Snakeisthestuff

Mitglied

55 Kommentare 36 Likes

Mal zum Vergleich der CrystalDiskMark von meiner neuen Samsung PM9A1 2TB im PCIE 3.0 x4 slot:

View image at the forums

Interessant dass die 4KiB Q32T1 Werte bei mir so viel niedriger sind. Limitiert da evtl. meine CPU (2950x) oder liegt das an einer unterschiedlichen Optimierung im Controller?

Antwort Gefällt mir

Igor Wallossek

1

10,211 Kommentare 18,898 Likes

Anderer Controller, andere Prämissen in der Firmware. Ich mage die Synthetics eh nicht sonderlich, wichtig ist auf dem Platz :)

Antwort 1 Like

Timberwolf

Mitglied

33 Kommentare 13 Likes

Selbst bei den diversen Iterationen der NVMe SSDs mit Silicon Motion SM2262EN Controller, welche von außen quasi fast identisch aussehen, gibt es recht deutliche Unterschiede Leistungsunterschiede. Dies ist je nach Hersteller der etwas anders abgestimmten Firmware für den SM2262EN geschuldet.

Sehr schön zu sehen wenn man sich den Testbericht der ADATA XPG Gammix S11 Pro, in dem auch die ADATA XPG SX8200 Pro und die Mushkin Pilot-E im Vergelich gelistet werden, sowie den Test der HP SSD EX950 vergelicht.

Antwort Gefällt mir

H
Headyman

Veteran

116 Kommentare 53 Likes

Schöner Test und interessante SSD, Danke
solche Relabels fallen gerne mal aus dem Raster.

Eine Anmerkung noch:
Der Satz: "...das Lesen ist nicht mehr ganz so schnell..."
passt nicht, denn es suggeriert einen deutlichen Einbruch, der aber bezüglich der erwähnten 3500MB/s bei nur 0,34% liegt.
Die Messungenauigkeiten dürfte Faktoren größer sein...

Antwort Gefällt mir

Igor Wallossek

1

10,211 Kommentare 18,898 Likes

Ich war mit der Jungfräulichen immer etwas über 3500 MB/s, insgesamt 5 Runs. Und dann mit der Gerbrauchten immer etwas drunter, auch 5 Runs. Die Differenz ist reproduzierbar. Aber sehr groß ist sie nicht :)

Antwort Gefällt mir

S
Schemmi

Neuling

5 Kommentare 1 Likes

Wäre ein gutes Upgrade, der Preis ist heiß 😁

Antwort 1 Like

Igor Wallossek

1

10,211 Kommentare 18,898 Likes

Ich finde den Preis interessant. Und es ist eben mal nicht das übliche Toshiba/Phison Gemisch, das es zu Hauf gibt.

Antwort 2 Likes

Shakj

Mitglied

17 Kommentare 19 Likes

Hab mir das Ding mal geholt. Läuft gut und wird nicht warm bzw. fängt sich fix wieder. Eine Info noch für etwaige Käufer des Teils: Das Ding hat drolligerweise 2 rote unfassbar helle Aktivitäts-LEDs unter dem weißen Sticker, die munter vor sich hin blinken. :)

Antwort Gefällt mir

Igor Wallossek

1

10,211 Kommentare 18,898 Likes

Die betreibt man ja eh einbgebaut mit Kühler ;)

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Igor Wallossek

Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel.

Computer nerd since 1983, audio freak since 1979 and pretty much open to anything with a plug or battery for over 50 years.

Follow Igor:
YouTube Facebook Instagram Twitter

Werbung

Werbung