Andybuc
Mitglied
Never give upWow die Rekorde purzeln
Ich bin dann offiziell abgehängt, meine Karte mag keinen fclk > 1600. Interessant das eure da so viel mehr packen!
Never give upWow die Rekorde purzeln
Ich bin dann offiziell abgehängt, meine Karte mag keinen fclk > 1600. Interessant das eure da so viel mehr packen!
Das wirst Du mit dem originalen Bios und Settings auch net so einfach stabil bekommen.Wow die Rekorde purzeln
Ich bin dann offiziell abgehängt, meine Karte mag keinen fclk > 1600. Interessant das eure da so viel mehr packen!
Aber Vclk+Dclk macht echt etwas? Ich habe gelesen, dass diese Freq. nur für die UVD nötig sind.Das wirst Du mit dem originalen Bios und Settings auch net so einfach stabil bekommen.
Erst mit nem 6900er load ins MPT wirds sinnvoll=passend, weil auch andere abhängige Takte und Spannungen
mit dranhängen.
wie Vclk+Dclk
habe ich auch gelesen, aber Es fällt auf, das Andybuc halt die höheren Werte hatAber Vclk+Dclk macht echt etwas? Ich habe gelesen, dass diese Freq. nur für die UVD nötig sind.
Damit Du was Neues zum Lesen hast:find's super, wie viel du testest und damit auch bissl was erklärst thx mal dafür, nech!!
Thank you, cleared it for me. I just remember that pressing delete SPPT didnt resolve my issue and I could not run any benchmark, probably should have not apply it while card was on OC.I can only give you an explanation on the SPPT part. It is the "software" version of the PowerPlay Table from the firmware of your graphics card. So, "soft" means here it is not stored on the hardware itself, it is a registry entry with the name SoftPowerPlayTable, SPPT. And yes, it overwrites the PPT, or more exactly, PPT is ignored as long as a SPPT is found in the registry.
No BIOS flashing involved, and it is only read at windows boot. So it shouldn't do anything to your computer as long as you don't reboot.
Actualy, that's how I found this topic, googling Andybuc and RX6800There is only 1 man who could achieve 19k in TS without EVC.
Look at Andybuc # 1096. He use a 6800nonXT Powercolr Limited Edition with a 6900-Bios by load to the MPT.
but
Attention! the Frequency in the FrequencyTab and the Volts in the PowerVoltageTab can not be higher set,
then your nonXT values.