Hi guys, hi Igor!! after our conversation in youtube im writing here so i can solve my questions!!First of all thanks for your help, in youtube you wrote me these :
'' The tool is more or less self-exploring. Simply enlarge the Wattman settings (GXF) to 2.3 GHz, the Voltage up to 1.25 Volts (should be enough) and the Amps (GFX) to 250. Then save the SPPT and reboot the PC. Then you can open Wattman on play with the clock rate and voltage to get a stable result. There are no reproducible settings, each chip is unique and needs different settings. Try and error at its best. : D ''
so i would like to go to place those numbers in my power tool fisrt
Εμφάνιση λιγότερων
ΑΠΑΝΤΗΣΗ
'' The tool is more or less self-exploring. Simply enlarge the Wattman settings (GXF) to 2.3 GHz, the Voltage up to 1.25 Volts (should be enough) and the Amps (GFX) to 250. Then save the SPPT and reboot the PC. Then you can open Wattman on play with the clock rate and voltage to get a stable result. There are no reproducible settings, each chip is unique and needs different settings. Try and error at its best. : D ''
so i would like to go to place those numbers in my power tool fisrt
Εμφάνιση λιγότερων
ΑΠΑΝΤΗΣΗ