Slightly better performing paste with poor durability, not suitable for graphics cards in long-term operation. False data sheets! Does not contain any nano tubes, it is a marketing lie.
Not bad at all and well performing. I measured a light outgassing and a smaller BLT after first Burn-In. The durability might be midiocre on GPU but better than a lot of others. The price is ok (yet).
Measurements
Thermal Conductivity (W/m·K)
3.6
5.3
+47.5 %
Min BLT
5
13
Interface Resistance
10.0
3.4
Heat Conducting Particles and Matrix
Al2O3, ZnO, Silicone
Al2O3, ZnO, Silicone
Particle Size
<=12 µm
Minimum Possible Layer Thickness
That's exactly why I wanted to see how far we could go with a bit of pressure and how much a paste can still be compressed. Here, I use the usual 9N pro cm², which is more than sufficient and higher than what, for instance, a GPU cooler would achieve.
Thermal Resistances Rth
Let's start with the most important aspect, the thermal resistance Rth. The key feature of Rth is that it correlates linearly with the layer thickness, while thermal conductivity follows a different curve and is far from linear. But experienced readers already know this. We are mainly interested in layer thicknesses of 200 µm or less for CPUs, and usually 100 µm or much thinner for GPUs, depending on bending.
I have now prepared a bar chart comparing the relevant layer thicknesses from 50 to 400 µm for Rth.
Effective Thermal Conductivity and Cooling Simulation
As is always the case in my other reviews: once you have Rth, λeff (effective thermal conductivity) is not really needed. We can also see how the values change across BLT (Bond Line Thickness), though we can't expect a linear curve anymore due to the included area and BLT.
I have now prepared a bar chart comparing the relevant layer thicknesses from 50 to 400 µm for λeff.
CPUs with Heatspreader
CPUs without Headspreader / Direct Die
GPUs
\n
Privacy settings
Igor’sLAB does not use programmatic or personalised advertising and does not collect user data for advertising purposes. Technically necessary functions work without consent. External content and services are loaded only after you allow them. Privacy policy
You can change your choice at any time later via “Privacy settings” in the footer or in our privacy policy.
Privacy settings
Igor’sLAB does not use programmatic or personalised advertising and does not collect user data for advertising purposes. Technically necessary functions work without consent. External content and services are loaded only after you allow them. Privacy policy
You can change your choice at any time later via “Privacy settings” in the footer or in our privacy policy.
Technically necessaryalways active
Required to operate the website and to store your privacy choice. This function cannot be disabled.
External content and services
Allows content and services from third parties, for example YouTube, X/Twitter, Google Search and Gravatar. Your IP address may be transmitted to the respective provider.
