Let’s start with the individual loads and the resulting power consumption. The almost 16 watts in idle go to lasen of pump, microcontroller and LED light chain, the rest is in the gradation as usual. Now let’s compare the values, because we see that it ends at plenty of 347 watts in the worst case, which is represented this time by Control and activated DXR in Ultra-HD. We already had the other average loads.
As a special service I also recorded the respective single voltages VDDCR_GFX, VDDCR_SOC and VDDCI_MEM, because these values differ significantly from what e.g. GPU-Z outputs as sensor value. Specifications and real values are always 2 pairs of shoes in reality. Even if you leave the Wattman at 1.15 volts or even tweak it to 1.25 volts, the VDDC_GFX is limited to 1.175 volts anyway and will never even come close as a default value, no matter what you set it to.
Standard compliance at the motherboard slot (PEG)
Now let’s look at the load of the motherboard slot, which is specified by the PCI SIG with 5.5 Amps. This results in a maximum power of 66 watts at 12 volts. You can see very clearly that under normal load exactly 3 amps are reached, which is absolutely exemplary. This also applies to the up to 3.6 amps and maximum load including increased power limit, because there is still an extremely large amount of leeway left here.
28 Antworten
Kommentar
Lade neue Kommentare
1
Urgestein
Urgestein
Veteran
Urgestein
Veteran
1
Neuling
1
Veteran
Urgestein
1
Urgestein
Urgestein
1
Urgestein
Veteran
Veteran
Alle Kommentare lesen unter igor´sLAB Community →