Radiator
The package also includes a 360 mm Calore Elite copper radiator in a black matte finish. The thickness of the radiator is 27 mm, which is a common version of slim radiators. Thus, in most cases available on the market, there should be no problems with installation or even collisions, if you intend to mount the radiator in the case lid. Because most of the time, that’s where we collide with thicker radiators on our hardware. With a bit of bad luck, the RAM or the voltage converter cooling blocks of our mainboard are in the way.
What I like here again is the fact that all components are made of copper and there are no galvanic reactions due to different materials used.
Product Name | CALORE ELITE CA360 | CALORE ELITE CA240 |
Number | 1 piece | 1 piece |
Dimensions [l×b×h] | 393×120×27 mm | 273×120×27 mm |
Flat tube | 12 sets ; 1.5×16 mm | 12 sets ; 1.5×16 mm |
Fin per inch | 17 | 17 |
Pipe series | 13 | 13 |
Screw thread | G 1/4″ | G 1/4″ |
Port | 2 | 2 |
Material | Copper | Copper |
Weight | 796 g | 571 g |
Surface | Black coated | Black coated |
EOS 120 mm ARGB Radiator Fan and RGB Controller
Let’s move on to the next product in the set and as you know, as a fan expert, I’m looking closely at that as well. Raijintek includes three 120 mm EOS 12 PWM ARGB fans in the set and of course I will put them up against our reference fan later. You will find the results here later in the review.
But let’s get to the visual and functional first. The fans have a simple, black frame and the rotor is translucent, so that we get quite a lot of luminosity of the RGB LED. In the set are 3 pieces of these fans included and are operated with the included controller, through which the PWM signal of our mainboard is tapped and forwarded to our fans, or which can be operated autonomously with its own programs. Switching off at the push of a button is also possible.
Product Name | EOS 12 RBW ADD-3 | EOS 12 RBW ADD-2 |
Number | 3 piece | 2 piece |
Dimensions [l×h×b] | 120×120×25 mm | 120×120×25 mm |
Input voltage | 12V | 12V |
Starting voltage | 7 V | 7 V |
Rated Current | 0.17A±20% | 0.17A±20% |
Power consumption | 2.1W±20% | 2.1W±20% |
Speed | 800~1800 R.P.M. | 800~1800 R.P.M. |
Bearing type | Hydro bearing | Hydro bearing |
Air flow | 75 CFM [Max.] | 75 CFM [Max.] |
Air Pressure | 2.3 mmH2O [Max.] | 2.3 mmH2O [Max.] |
Lifetime | 40,000 hours | 40,000 hours |
Background noise | 28 dBA [Max.] | 28 dBA [Max.] |
Connection | 5V ADD Header PWM 4 pin Header |
5V ADD Header PWM 4 pin Header |
Weight | 390g | 260g |
Accessories | Installation Screws × 12 ARGB-PWM Control Hub × 1 Remote Control × 1 |
Installation Screws × 8 ARGB-PWM Control Hub × 1 Remote Control × 1 |
With RGB control, as just mentioned, we have two options. We can control the whole thing standalone with the included remote, or we can grab the RGB signal directly through our motherboard’s digital 5V ARGB header and loop that through to our fans. This allows us to perfectly synchronize our RGB illumination of the rest of the system.
The controller has a total of 5 PWM connectors and 5 RGB connectors. The whole thing is powered via a SATA power connector.
21 Antworten
Kommentar
Lade neue Kommentare
Veteran
Urgestein
Veteran
Veteran
Veteran
Urgestein
Urgestein
Urgestein
Urgestein
Urgestein
Neuling
Veteran
Mitglied
Urgestein
Urgestein
Neuling
Urgestein
Veteran
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →