Test print
We start with the optimized AIO test from Barcode3D, which was printed in 1 hour, 24 minutes and 47 seconds. This shows that speed is not everything – or at least not without excellent component cooling. Overhangs up to 45° are fine, everything above that either print more slowly or use supports.
With this Z-Wobble test from me, however, the Plus4 shows its best side again and can offer a very nice even print image. Printed in 1 hour and 32 seconds.
And there is nothing to complain about in Sci3D’s clearance test either, even the 0.15mm gap is no problem. The whole thing took 1 hour, 3 minutes and 54 seconds.
The evaluation of the Califlower from Vector3D also attests to good results , printed in 1 hour, 2 minutes and 44 seconds:
And of course a few benchmarks should not be missing, the GCODE for this first one was already on the printer:
Only 16 minutes and 23 seconds is impressive, but it doesn’t look particularly good, nor is it possible to check the settings used.
So I adapted the 0.20 standard profile from the QIDIStudio to the rules of the Speedboat Challenge and here you can see the result after 31 minutes and 28 seconds.
And this third boat was printed in 44 minutes and 43 seconds with a slightly customized 0.20mm standard profile of the Plus4.
Tests are one thing, the other is real used objects in practice. And this is where the Plus4 can deliver really well, I have printed several large projects with it.
Because why buy a flabby mask for Halloween when you cansimply make the real-looking Jason Battle Mask yourself in exactly the right size?
Then drag the whole thing through the front garden a few times, trace the cracks with charcoal and splash some fake blood on it.
And the matching decoration in the form of the Halloween Pumpkin Tall from SabreDesign follows immediately afterwards.
Even with a layer height of 0.28mm, the results are really impressive.
And the Yarl Bowl from BensPrintlab was no problem.
26 Antworten
Kommentar
Lade neue Kommentare
Urgestein
Urgestein
Veteran
Moderator
Moderator
Urgestein
Veteran
Moderator
Mitglied
1
Mitglied
Urgestein
Urgestein
Urgestein
Moderator
Moderator
Urgestein
Moderator
Urgestein
Alle Kommentare lesen unter igor´sLAB Community →