DDR-RAM Editor's Desk Reviews System

One last Hurrah for 5H16M?! – Corsair Dominator Platinum RGB DDR5-6600 CL32 2x 16 GB Kit Review with Teardown and Overclocking

Overclocking

Besides the already very tight XMP timings, the kit is of course also overclocked once again in our benchmark race. Today, there are even two different overclocks, once with active cooling for the absolute performance maximum and furthermore with passive cooling for a somewhat more conservative compromise.

In fact, even with manual overclocking, the kit lives up to the expectations one might have when buying the fastest DDR5 kit to date. DDR5-7000 can be stabilized on Asus’ Maximus Z690 Apex from this year and our test CPU with a particularly strong IMC (Integrated Memory Controller).

A few other kits have cracked this mark in past tests, but never together with tCL 30 at 1.55 V VDD and VDDQ. The rest of the timings are also on the same level or tighter than all other Hynix M-Die based DDR5 kits, with the exception of tCWL where so far the G.Skill Trident Z5 kit remains untouched with its 10 layer design.

Also because there is already an even higher clocking successor IC from SK Hynix, which we have also already looked at, I would like to show another streamlined configuration with manual subtimings for the specified 6600 Mbps as an alternative. If you believe the previous Zen4 leaks, overclocking in this range could also be interesting for the upcoming AMD DDR5 platform in 1:1 mode.

The voltage remains at 1.4 V here and tREFI in particular has to be significantly defused in order to still perform refreshes sufficiently frequently even at high temperatures of up to 70 °C. Especially the activate timings and the tertiary timings, which are important for bandwidth, can be optimized significantly compared to XMP.

Test systems

The complete list of the test hardware used is still available in tabular form below:

Test systems

Hardware:
  • CPUs:
    • Intel Core i9-12900KS (5.1 GHz P-Core, E-Cores disabled, 4.9 GHz cache)
  • Mainboards:
    • Asus Maximus Z690 Apex (90MB18I0-M0UAY1, 2022-01, BIOS 1701)
    • DDR4: MSI Pro Z690-A DDR4 (BIOS 171U1)
  • RAM kits:
    • DDR5:
      • Corsair Dominator Platinum RGB DDR5-6600 CL32 2x 16 GB Kit
      • Corsair Vengeance RGB DDR5-6000 CL36 2x 16 GB Kit
      • G.Skill Trident Z5 DDR5-6400 CL32 2x 16 GB Kit
      • Teamgroup DELTA RGB DDR5-6400 CL40 2x 16 GB Kit
      • Patriot Signature DDR5-4800 CL40 2x 16 GB Kit
      • Corsair Dominator Platinum RGB DDR5-6200 CL36 2x 16 GB Kit
      • Teamgroup T-Force VULCAN DDR5-5200 CL40 2x 16 GB Kit
      • ADATA XPG LANCER RGB DDR5-6000 CL40 2x 16 GB Kit
      • Corsair Dominator Platinum RGB DDR5-5600 CL36 2x 16 GB Kit
      • Kingston Fury Beast DDR5-5200 CL40 2x 16 GB Kit
    • dDR4:
      • G.Skill Trident Z Royal DDR4-4000 CL16 2x 16 GB Kit
  • Power supply: beQuiet! Dark Power Pro 12 1500 W
  • SSD: Crucial MX500 2 TB (SATA 3, OS)
  • Graphics card: Nvidia GeForce RTX 3090 Founders Edition (Game Ready Driver 516.40)
  • Operating system: Windows 11 Pro 64-bit (up-to-date)
Cooling:
  • CPU: Corsair iCUE H115i RGB PRO XT 360 mm AIO, Corsair XC7 RGB Pro, Supercool Computers Direct-Die water block
  • CPU TIM: Arctic MX-4 Alphacool Subzero, Coollaboratory Liquid Ultra
  • Radiators: Alphacool NexXxoS ST30 480 mm + HardwareLabs Black Ice GTX 240 mm + Watercool MO-RA3 360 Pro
  • Fans: 4x Phobya NB-eLoop 120 mm 1600 rpm + 2x Noiseblocker NB eLoop B12-4 120 mm + 9x XPG Vento Pro 120 mm
  • Pump: 2x Alphacool D5 VPP655
Housing:
  • Open Benchtable
Periphery:
  • Monitor: EVGA XR1 Lite, Benq XL2720
  • Keyboard: KBC Poker 2 (Cherry MX Brown)
  • Mouse Zowie FK1
Measuring devices:
  • Thermometer: Elmorlabs KTH (calibrated)
  • Power meter: Elmorlabs PMD
  • USB-to-I2C Adapter: Elmorlabs EVC2
  • Flow meter / thermometer: Aqua Computer high flow NEXT
  • HWInfo64 7.27_4855

For better clarity, the following abbreviations are used in the diagrams:

  • 12900K: Intel Core i9-12900K CPU
  • 51/0/49: Multipliers for P-cores x51, E-cores 0 (deactivated), cache x49 at BCLK 100 MHz
  • TZ5: Trident Z5 module from G.Skill
  • XPGL: XPG LANCER RGB DDR5 modules from ADATA
  • DPR: Dominator Platinum RGB DDR5 modules from Corsair
  • FB: Fury Beast DDR5 modules from Kingston
  • DR: Dual-Rank, if not specified Single-Rank
  • 3600c14: configuration with 3600 Mbps and tCL timing 14, see screenshots for all timings
  • 1T, 2T: Command rate 1T or 2T
  • *: completely manually set subtimings, see screenshots
  • G1, G2: Gear 1, Gear2 – ratio between IMC clock and RAM clock, Gear 1 = 1:1, Gear 2 = 1:2
  • H16M: SK Hynix 16 Gbit M-Die memory chips
  • S16B: Samsung 16 Gbit B-Die Memory Chips
  • ❄: active cooling with a 120 mm 2000 rpm fan

Timings of the DDR4 comparison config:

Kommentar

Lade neue Kommentare

Slashchat

Mitglied

10 Kommentare 2 Likes

also wenn ein 3600er cl14 kit in 1% fps sogar schneller ist sehe ich hier keinen sinn, wenns reins ums gaming geht.
ramdisk und ganze games im ram mal abgesehen :D
ein 64gb kit kostet dann aber auch 500 euro. sind aber schon coole werte mit ddr5 und ramdisk und ahnlichen einsatzgebiet.

Antwort Gefällt mir

Bandyto

Mitglied

48 Kommentare 56 Likes

Wie immer ein handwerklich exzellenter Artikel. Seit längerem frage ich mich bei den Temperaturmessungen, wie die aktive Kühllösung per 120 mm-Lüfter realisiert wird. Ist das Marke Eigenbau mit einer selbstgemachten Halterung aus dem 3D-Drucker? Für den Test einfach nur draufgelegt ("Lüfter direkt auf den Modulen")? Oder gibt es für DDR5 bereits brauchbare RAM-Lüfter bzw. -Kühlkonstruktionen von Drittanbietern? Zu Letzterem habe ich bisher nichts gefunden.

Antwort Gefällt mir

P
Phoenixxl

Veteran

156 Kommentare 118 Likes

So spannend und beeindruckend ich High-End RAM aus technischer Sicht finde...535€ sind 370€ mehr im Vergleich zu einem 5200er Kit was rund 165€ kostet.
360€ sind der Unterschied zwischen einem 5800X3D und einem Ryzen 5500.
Das ist der Unterschied zwischen einer 3070 und einer 3060.
In beiden Fällen reden wir von grob (!) 50% Leistungsunterschied.

Beim RAM kommen wir dagegen meistens auf weniger als 10%.

Antwort 1 Like

skullbringer

Veteran

296 Kommentare 297 Likes

Tatsächlich lege ich den Lüfter nur auf die Module drauf und stütze ihn am 24-pin oder dem CPU Block ab. Da die Abwärme von DDR5 so gering ist, ist die Lüfterdrehzahl oder die Anströmung effektiv egal. Da reicht ein kleiner Luftzug schon für die allermeisten Vorteile. Wer einen Delta mit 5000 rpm und einem 3D gedruckten, strömungsoptimierten Trichter drauf setzt, gewinnt auch nur noch 1-2 °C. ;)

Es kommt wie gesagt immer aufs Game an und in manchen Spielen oder Applikationen sind die Vorteile von DDR5 eben auch massiv. Natürlich ist ein solches high-end Kit preislich komplett unvernünftig, aber die Zielgruppe sind eben auch Käufer, die schon eine 3090 TI und einen 12900KS haben und auf Teufel komm raus die letzen 5 FPS wollen. Wenn ich ehrlich bin, gehöre ich da selbst auch dazu 😅

Antwort 5 Likes

S
Sixtus

Mitglied

34 Kommentare 13 Likes

War das ein Apex Board?

Da greife ich immer wieder zu Patafix Propower:

View image at the forums

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Xaver Amberger (skullbringer)

Werbung

Werbung