Case Reviews

Lian Li PC-CK101 Locomotive PC – We go mobile and cut the cables (Retro Part 2)

Summary

The add-on is certainly only something for model railroad freaks, enthusiasts, and confirmed playmates, but then the whole thing really has its appeal. You don’t have to switch it on all the time and let it drive, it’s enough to have the feeling that you could if you wanted to.

Thus, the assessment remains: a special case for special users. Therefore, this time there is a small video of me as a summary instead of many words, because images have their own language:

Whether the entry-level price of well over 300 Euros for the case and drive kit is really worth it is, of course, always a matter of opinion and taste. But even the case alone without motor and rails has its appeal as a decorative HTPC, and being different definitely justifies the rather steep price in my opinion.

With a few minor exceptions, the train and its rails are excellently finished, and the paint in particular is tough and robust enough to withstand trips like mine without complaint. Edgy gravel, crooked iron sills, old grease, a nasty drizzle and even cold didn’t matter, the part still works after a comprehensive cleaning. Sure, it’s more of a feasibility study by Lian Li to show what they are capable of with aluminum in general and as a company in particular. Let’s put it this way: Experiment successful, testers enthusiastic, locomotive still rolling and the HTPC also does what is expected of it. There is no need to write more about it and the cold has also gone away in the meantime.

My thanks also go to the Saxon Railway Museum e. V. at this point, An der Dresdner Bahnlinie 130c in 09131 Chemnitz and the dedicated staff who keep this museum and the exhibits alive as enthusiasts with much sacrificed free time. A visit is worthwhile in any case and who is still looking for a worthwhile destination for the children: here you will certainly not be disappointed.

 

Kommentar

Lade neue Kommentare

MeinBenutzername

Veteran

209 Kommentare 74 Likes

So, jetzt brauch die kleine Lok nur noch rund 50 Dienstjahre und dann würde sie zwischen den Großen nicht mehr so hervorstechen! ;)

Antwort Gefällt mir

B
Besterino

Urgestein

6,709 Kommentare 3,308 Likes

Wenn es nur nicht so heikel wäre, 220V frei zugänglich zu haben, dann könnte man fast die Lok bzw. den PC über die Schienen mit Strom versorgen (wie bei Lehmann Gartenbahn / alte Playmobil). Die brauchen allerdings nicht ganz so viel Bumms wie ein PC… :P

Antwort Gefällt mir

D
Deridex

Urgestein

2,212 Kommentare 846 Likes

Aus meiner Sicht war das Highlight natürlich der "Ost-TEE" ;)

Antwort Gefällt mir

Igor Wallossek

1

10,178 Kommentare 18,761 Likes

View image at the forums

Passend zum Artikel heute dort gewesen 😃

Antwort Gefällt mir

C
ChaosKopp

Urgestein

516 Kommentare 534 Likes

Herrlich meschugge, das Projekt.

Schön, welchen Mut der Hersteller hatte. Schön, mit welcher Konsequenz Du es weitergetrieben hast.

Versorgung mit Strom über die Schiene wäre nett gewesen, aber wer mag schon seinen Hund grillen?

Danke für das schöne Wochenendthema.

Antwort Gefällt mir

D
Dezor

Veteran

492 Kommentare 215 Likes

Definitiv ein Gehäuse, was aus der Masse hervorsticht. Und schön, dass man es auch als Kleinserie kaufen kann/konnte.

Bezüglich der Stromversorgung des Systems: Für ein HTPC dürfte ein kleines, schwaches System mit Atom-Prozessor (bzw. den Celeron oder Pentium heißenden Nachfolger) reichen. Solche Boards gibt es teilweise auch mit 12 V-Versorgung wie hier https://www.fanlesstech.com/2022/07/gigaipc-mitx-4125a-available.html. Damit sollte eine Stromversorgung über die Schienen möglich sein. Jedenfalls hätte ich bei 12 V weniger Bedenken als bei 230 V.

Alternativ schraubt man ein Pico-PSU-Netzteil rein und legt an den Schienen die dafür benötigten 12 V (oder auch 19 V oder was auch immer) an.

Antwort Gefällt mir

K
KalleWirsch

Veteran

186 Kommentare 91 Likes

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Igor Wallossek

Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel.

Computer nerd since 1983, audio freak since 1979 and pretty much open to anything with a plug or battery for over 50 years.

Follow Igor:
YouTube Facebook Instagram Twitter

Werbung

Werbung