Cooling Fans Reviews

Lian Li Uni Fan SL120 RGB Review – Hype or Reality?

Fan measurement chamber and claim

And since there is currently no source that offers realistic and usable data, even in comparison, we have invested a lot of time and money and simply developed our own fan measuring station with the advice of a cooling unit manufacturer and then calibrated it. Here the colleague Pascal Mouchel has done a great job and the result as the model “Sarcophagus I” can be seen in the meantime. The heavy and solid body made of thick MDF boards is screwed, glued and sound-insulated. How it all works and what we can and cannot measure in the end, you will learn in this article.

By now most of it has materialized really nicely, also with a lot of good feedback from the community and technical help from some industry partners. Of course, what we can measure from now on only meets semi-professional requirements, even though all measuring instruments have been calibrated in an elaborate and cost-intensive way. But that’s enough for all areas of what concerns the PC self-construction and -conversion. Of course, we are not a standardization company or the TÜV, but we try to measure everything as accurately as possible, which still remains within a reasonably affordable range.

 

Measuring chamber with sound level control (measurement takes place separately)

 

Tests as case fan and on radiators

Currently, there is always the question of what characteristics such a 120 or 140 mm fan really has. Not every model is suitable for all radiator thicknesses and many a supposed powerhouse loses so much pressure on radiators that it can hardly be called suitable. The data on volume flow (“throughput”) and static pressure in the data sheets are of no help if something works well on a slim radiator and fails completely on a 45 mm radiator.

In the picture we can see the middle partition between the two chambers, which supports the fan and also the radiator. Decoupling is of course very important, and we were fortunate to have expert help in calculating the volume for the chambers. Each of the chambers is also expediently lined with nubby foam and designed in terms of material technology so that there are hardly any disturbing influences.

The “honeycomb” behind the fan was recommended to us by Black Noise and the cooling manufacturer. This means that all coolers are equally well integrated, because each has a different exit angle and this is exactly what can be compensated for. However, due to the honeycomb, there is no tear-off edge and the airflow is directed directly to the outlet.

Radiators and fans are decoupled and screwed down with their own clamping device. On the picture you can see very nicely the improvised clamp with thick washers and insulation material as a base. The control is done by an Aquaero from Aqua Computer, which we bought, so we can control and test the fans by voltage (DC) or by PWM. Both are needed, because many fans, some people don’t know, can’t be brought to the lower and upper limits of the speed range with pure voltage regulation and also show other anomalies, about which we will write something at the appropriate place.

Volume flow

We measure the volume flow at the outlet of the second chamber where the air is blown out. This range is covered relatively accurately by comparative measurement in the measurement setup of the refrigeration partner, so that our testo 410i now delivers quite reliable results to the electronic measurement data acquisition system, which correspond quite well with the reference data of the professional measurement. What is important here is not the price of the equipment, but the appropriate positioning and the exact calibration with series of comparative measurements.

Static pressure

The measurement of the static pressure is carried out as usual as a differential pressure measurement. For this purpose, the special “bowl” is clamped on so that it closes airtight. Here too, of course, measurements were taken with borrowed, professional equipment and time-consuming calibrations were carried out. For this measurement we also use the 510i, a device we purchased ourselves from testo, and also collect the data wirelessly.

Noise emission

Measuring the noise level is a bit tricky, but works quite well in the evening hours at the measurement location. We decided to use dBA or dBC because values below one sone can hardly be measured reliably with still affordable and calibrated equipment and the software conversions of various software programs tend to confuse and become inaccurate in this low range. I’d rather use dBA then, especially since most people can do something with it. The measuring distance is 50 cm from the centre axis of the fan inlet.

We take two approaches to these measurements. For quick and plausibility tests we use a Voltcraft SL 451, which we calibrated according to ISO and whose microphone we placed decoupled from the body. The data acquisition takes place outside the measuring chamber. The Voltcraft SL 451 was kindly and uncomplicatedly provided to us by Conrad Elektronik. It is also the only component not acquired by ourselves. All other measuring instruments including accessories and electronics were purchased by us or provided from private stocks.

Our own purchases include a calibrated measurement microphone with XLR connector and low-noise USB interface. Measurements are taken in the evening and night hours in rural areas, so that one can already be quite satisfied with a basic level of below 26 dB(A). Since everything will be above this anyway during the measurement setup with a distance of 50 cm, this should not be a problem.

We also took the feedback from the community and evaluated the frequency band for each measurement, so you not only get the SPL values (sound pressure) in dB(A), but also a nice frequency analysis that helps to describe the sound character perfectly. Bearing or motor noise, vibrations or the tearing noise on the rotor – everything becomes mercilessly visible.

We will not go into certain details and approaches in this article, because there is still some foreign know-how in this structure and some things would probably be too far for the normal consumer. If you are interested and would like to build something like this, you are of course welcome to contact us. This also applies to all those who would like to contribute suggestions and tips, because we are still at the very beginning and can still correct or expand.

What we measure and how the result looks like, you can see on the next page by means of an exemplary selected fan, which however is anything but our reference. That’s exactly what we are still looking for 🙂

Test setup  
Housing / measuring chamber Two-chamber measuring set-up with sound insulation, fully air-conditioned room
Volume flow and flow velocity testo 410i (calibrated)
Differential pressure measurement testo 510i (calibrated)
Sound level measurement Measuring microphone Class 2 and USB interface, Smaart 7, Voltcraft SL 451 (Conrad, permanent rental, calibrated),
Speed control and fan control Aqua Computer Aquaero 6 Pro
Commissioning March / April 2021

 

Kommentar

Lade neue Kommentare

RedF

Urgestein

4,600 Kommentare 2,521 Likes

Schade, das stecksystem ist schon nett.

Antwort Gefällt mir

B
Betabot

Neuling

6 Kommentare 2 Likes

Ich habe in meinem System 6 der Dinger, 3 auf einem 40mm Radiator und 3 auf einem 60mm Radiator, weil sie einfach Optisch passen.
Das Motor brummen ab ca. 1200 Umdrehungen ist ziemlich nervig. Ich hab sie deswegen auf 900 und nur unter dauerlast/ warmen Wasser drehen sie hoch auf 1200-1400.
Meine Hoffnung für die Zukunft ist das entweder LianLi mit einer zweiten Generation nachbessert oder ein Konkurrent die Idee kopiert.

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

Daisy Chain ist nichts neues Arctic hat sowas auch vielleicht nicht so elegant aber schenkt sich nichts. Das Design ist hier wohl der ausschlaggebende Punkt warum so viele die Uni Fans Sl120 kauft.

Antwort Gefällt mir

Q
QuietCoolSmall

Mitglied

14 Kommentare 0 Likes

Schade eigentlich ... gutes Konzept, aber leider etwas teuer für die (mangelnde) Performance

ich glaube, da hat sich der Fehlerteufel eingeschlichen ... aber vielleicht irre ich mich ja auch:
https://www.igorslab.de/wp-content/uploads/2021/07/02-25mm-1.png -> 25mm Radiator Soundpressure Level falscher 2. Lüfter

und

-> wurden hier vielleicht Anlauf und Turnoff RPM beim Noctua vertauscht?

Antwort Gefällt mir

t
tcd

Mitglied

78 Kommentare 27 Likes

Kleiner Hinweis zum Thema "Garantie". Der Gesetzgeber schreibt eine zweijährige Gewährleistung für Mangelfreiheit des Produktes fest. Die 6 Monate Beweislastumkehr gelten nur im Falle des Verbrauchsgüterkaufes (Privatperson kauft von einem Kaufmann). Die Gewährleistung muss der Verkäufer gewähren.

Eine Garantie dagegen ist gesetzlich nicht vorgeschrieben. Eine Garantie deckt zudem nur die in der Garantieerklärung genannten Fälle ab. Mit der Garantie hat der Verkäufer grundsätzlich nichts zu tun, es sei denn, dies ist im Verhältnis Verkäufer/Garantiegeber so geregelt. Garantiegeber ist oft der Hersteller, kann aber z.B. auch eine Versicherung sein.

Gewährleistung gibt es im Verbrauchsgüterkauf immer. Garantie ist eine freiwillige Leistung daneben.

Antwort 1 Like

N
Nevra

Mitglied

32 Kommentare 11 Likes

Wie immer Super Test! Freue mich schon auf den nächsten Lüfter Test.
Aber leider ist es halt so dass es nicht etwas dazu gibt, sondern immer etwas anderes leiden muss. Entweder Leistung oder einfache Handhabung.... irgendwo wird immer gespart.

Wird es am Ende mal eine Zusammenfassung oder Datenbank geben wo man sich z.B. die interessierten Lüfter auswählen könnte und dann die Daten deren nebeneinander hätte? Wäre eine Super Sache auch um eure ganzen mühen zu ehren!

Antwort Gefällt mir

Igor Wallossek

1

10,104 Kommentare 18,588 Likes

Wenn noch mehr Lüfter zusammengekommen sind, wird eine Datenbank mit Suchfunktion und Resultaten geben :)

Antwort 7 Likes

RedF

Urgestein

4,600 Kommentare 2,521 Likes

Ich hoffe durch so eine Datenbank muß sich die R&D der Hersteller mal ins Zeug legen.

Hat bisher ja noch niemand ernsthaft gegeneinander getestet.

Antwort Gefällt mir

B
Besterino

Urgestein

6,668 Kommentare 3,264 Likes

Hätte mich sehr überrascht, wenn Lian Li auf einmal brauchbare Lüfter hinbekommen hätte.

Das was bei deren Gehäusen so dabei ist, ist jedenfalls nach meiner Erfahrung im Hinblick auf Lautstärke/Laufruhe eher unterste Schublade.

Antwort 1 Like

RAZORLIGHT

Veteran

354 Kommentare 260 Likes

Richtig enttäuschend, da kann man gute Lüfter + Phanteks Halo Rahmen verwenden wenn es unbedingt RGB sein muss.
Gibt's eigentlich eine Stellungnahme von Blacknoise bzgl. den Qualitätsschwankungen?

Antwort 2 Likes

Igor Wallossek

1

10,104 Kommentare 18,588 Likes
v
vonXanten

Urgestein

801 Kommentare 334 Likes

@Igor Wallossek auf Seite 4 sollte da bestimmt eine ³ hin ;)

Ansonsten wieder ein aufschlussreicher Test! Der Preis scheint nicht alles zu sein bei Lüftern bzw. bei der Qualität.

Antwort Gefällt mir

e
eastcoast_pete

Urgestein

1,398 Kommentare 765 Likes

Eine Datenbank von Lüftern wäre schon toll! Für ein Projekt suche ich zB nach einem 120 oder 140 mm Lüfter mit hohem Volumen und statischem Druck, der Lärmpegel ist hier fast egal und weit weniger wichtig als Druck, Preis und Langlebigkeit. Wenn man nach sowas in so einer Datenbank suchen kann bin ich mit Sicherheit nicht der einzige, der öfter Mal reinschaut!

Antwort Gefällt mir

Martin Gut

Urgestein

7,719 Kommentare 3,537 Likes

Bis jetzt kann man da eigentlich nur auf der Geizhalsseite sinnvoll filtern. Die Lüfter in der selben Situation testen sagt aber natürlich deutlich mehr aus als die Herstellerangaben zu vergleichen.

Antwort 1 Like

Igor Wallossek

1

10,104 Kommentare 18,588 Likes

Ich suche noch einen PHP und MySQL Freak, der das umsetzen kann. Enthusiast und nicht überzogen teuer. Ich hätte das gern interaktiv.

Antwort Gefällt mir

B
Besterino

Urgestein

6,668 Kommentare 3,264 Likes

Wenn’s nur um Performance geht und die Lautstärke egal ist: Noctua Industrials…

Antwort Gefällt mir

e
eastcoast_pete

Urgestein

1,398 Kommentare 765 Likes

@ Martin Gut: Danke! Der "Industrial" Noctua dort ist eigentlich das, wonach ich suche, leider ist er für 24 V ausgelegt, und ich hätte, wenn's irgendwie geht, es gerne bei 12 V belassen. Ansonsten hat der Lüfter alles was ich brauche, sogar IP67, und der Preis stimmt eigentlich auch.

Antwort Gefällt mir

Martin Gut

Urgestein

7,719 Kommentare 3,537 Likes

Eine Variante ist für 12 V.

Antwort Gefällt mir

B
Besterino

Urgestein

6,668 Kommentare 3,264 Likes

Genau, gibt normale 12V und die pusten auch alles andere (aus dem Consumer-Regal) schon weg.

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Igor Wallossek

Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel.

Computer nerd since 1983, audio freak since 1979 and pretty much open to anything with a plug or battery for over 50 years.

Follow Igor:
YouTube Facebook Instagram Twitter

Werbung

Werbung