Cooling Fans Reviews

EK Vardar X3M 120 mm D-RGB case fan in test – Very good performance and a bit thicker than the rest

Disclaimer: The following article is machine translated from the original German, and has not been edited or checked for errors. Thank you for understanding!

The EK Vardar X3M is still relatively new as a 120 mm case fan and has also been requested several times by the community. That’s exactly why we have this fan from EK Waterblocks from Slovenia in our test today, which is manufactured by one of the recommendable OEMs in China and whose genes can thus also be found in other good case fans. Of course, every decent supplier like EK also individualizes and optimizes its products themselves, and so it happens that very similar products with almost identical drives still perform quite differently.

Of course, this also arouses curiosity, because the almost 25 euro fan with its 27.5 mm thickness is exactly in the middle between the usual 25 mm fans and the thick ships like the Phanteks T30. The 2.5 mm increase in installation depth allows for a slightly more expansive rotor design, which brings the rotor blades to more throughput and pressure at the same speed. However, this is not completely unproblematic if you place a radiator in the top of the case and then these fans might already collide with the VRM cooler of the mainboard. Here you really have to do some math and also measure before you buy, so that you don’t run out.

 

But the extra 2.5 mm did anything but harm the fan, because it performs really well. That’s a little spoiler in advance, because we prefer to present recommendable products, because the added value for the reader is only given if you can really recommend a product with a clear conscience (or, conversely, have to issue a purchase warning). From this point of view, we are in the test field of usable fans, that’s already in advance. DRGB aka ARGB is of course also available and therefore it is one more Christmas tree on the market, but it has its qualities, as I will show in a moment.  And don’t get confused – DRGB is normal digital 5V ARGB, they just call it something else again. For whatever reason.

 

One relies on a classic double ball bearing, a black, plain frame and a white, translucent rotor with 7 blades, which optically does not hide any secrets at first sight, but places all the LEDs in the hub. The PWM-controlled fan manages a speed range from 500 to 2200 rpm and does with a semi-passive mode (i.e. without fan stop).  The decoupling with the comprehensively attached and also exchangeable rubber corners (different colors of the vibration dampers selectable) is well solved, because it does not twist with the tightened screw. The gap dimensions and surface finish are very good. The power consumption of under 2.2 watts at full speed is pleasingly low.

But first once again the data sheet for better comparability to the later measurement results:

Form factor 120 mm
Starch 27.5 mm
PWM Yes
RGB DRGB/ARGB (hub)
Decoupled Yes
Color Frame Black
Accent color Coloured decoupling rubbers
Color rotor Translucent
Weight in g 210
min. speed 500 (fan stop below 25% PWM)
max. speed 2200
Volume flow m3/h 114
Flow rate CFM 67
static pressure mmH2O 2.75
Sound pressure dBA 34,2
Life Time hrs 50,000

On the next page you will first see how and what we test and why. Understanding the details is extremely important in order to be able to objectively classify the results later. The differences between many models are more in the details and THE best fan for all situations can hardly exist. There is a certain optimum in every situation and of course there are also good all-rounders. But they usually have their price. But if you plan to use 60mm radiators for example, you might save money by choosing the best model for your application, which might not perform so well as a case fan. And vice versa, of course.

EK Water Blocks EK-Vardar X3M 120ER D-RGB weiß, 500-2200rpm, 120mm (3830046996985)

 

 

Kommentar

Lade neue Kommentare

RedF

Urgestein

4,601 Kommentare 2,521 Likes

Mir scheint eure Tests üben langsam druck auf die Hersteller aus, es kommen immer mehr gute Lüfter auf den Markt.

Antwort 1 Like

RAZORLIGHT

Veteran

354 Kommentare 260 Likes

Japp, Wahnsinn wie sich der Lüftermarkt entwickelt. Langsam wird's schwer sich zu entscheiden.

Für alle die kein RGB wollen, den Lüfter gibt es auch ohne für ~5€ weniger.

Antwort 3 Likes

Igor Wallossek

1

10,105 Kommentare 18,594 Likes
FfFCMAD

Urgestein

663 Kommentare 170 Likes

@Igor: leiser/ lauter im Fazit. Was denn nun :D

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes
a
aclogic

Veteran

117 Kommentare 50 Likes

Leider ist euch eine Sammlung an Fehlern bei diesem Artikel unterlaufen, Ihr habt leider die Werte vom Noctua NF-A12 PWM und bequiet Light Wings 120PWM High Speed vermischt und als bequiet Light Wings 120PWM High Speed ausgegeben.

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

nee der Be Quiet ist ab sofort die neue Referenz hat bestimmte Gründe. Zukünftig wird der Normale BQ der mit bis zu 1700 dreht mit anderen Lüftern verglichen die auch nur so hoch drehen. Alles was höher dreht wird mit dem BQ HS verglichen.

Grund ist dafür das die Qualitäts Streuung wohl bei Noctua naja nicht das ist was wir gerne von einem Referenz Lüfter sehen wollen.

Daher haben wir uns für BQ entschieden.

Antwort 2 Likes

a
aclogic

Veteran

117 Kommentare 50 Likes

Dann schau dir die Werte nochmal an
z.B. Volumentstrom für 25 mm Radiator in m³/h
aus dem BeQuiettest für die 120mm

Datasheet 100% 1000 rpm 500 rpm
Nocuta 102,1 80,6 40,7 11,8
BQ HS 88,86 78,6 31,4 12,3

aus dem EK Vardar Test

Datasheet 100% 1000 rpm 500 rpm
BQ HS ???? 88,86 80,60 40,7 11,8

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

ach jetzt kapiere ich es ok danke fürn Hinweis weiß nicht was da passiert ist. Danke wird geändert

Antwort Gefällt mir

Capt.Flint

Mitglied

31 Kommentare 21 Likes

Erstmal einen großen Dank, Lüfter und diesbezügliche Tests werden ja von den Redaktionen eher Stiefmütterlich behandelt. Wahrscheinlich glaubt man, das jeder mit den verbauten inkl. Lüftern gut bedient ist, dabei gibt es nur wenige Komponenten im PC die einen so auf den Nerv gehen können.
Ich habe ins Auge gefasst meine AIO-Lüfter zu wechseln. Das sind dann gleich mal 6-Stk. und ich möchte ja etwas verbessern.
Wenn ihr jetzt schon so einen Schwung an Daten habt, wäre es schön diese in eine kl. Datenbank zu packen, so könnte man sich für seine Anforderungen ein geeignetes "vom Fachmann getestet" Modell aussuchen.
Die m. M nach schönsten ARGB-Lüfter Fractal Prisma AL-12 PWM und -14 PWM könntet ihr auch mal testen um sie besser einordnen zu können (sind sie nur schön oder auch gut?).
Bei Bedarf kann ich auch ein noch ungeöffnetes Exemplar jeweils in 120 und 140 mm aus dem freien Handel für einen Test zur Verfügung stellen.

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

Welche Lüfter meinst du denn? Und an der Datenbank sind wir dran das wird alles so kommen wie Gewünscht.

Antwort 1 Like

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

Nebenbei Erwähnt die Daten stimmen jetzt Freunde ich entschuldige mich bei euch das es da zu Technischen Problemen gekommen ist.Das Technische Problem wahr wohl ich selbst. 🙈

Antwort 1 Like

Capt.Flint

Mitglied

31 Kommentare 21 Likes

Fractal Prisma AL-12 PWM und -14 PWM

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

Liegen da und gibt es die Tage als Test

Antwort Gefällt mir

Capt.Flint

Mitglied

31 Kommentare 21 Likes

Ihr seid grandios. THX.

Antwort Gefällt mir

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Review Team

Werbung

Werbung