Cooling Reviews Watercooling

Corsair H150i ELITE LCD Review – Colorful and with a display

Disclaimer: The following article is machine translated from the original German, and has not been edited or checked for errors. Thank you for understanding!

Since pretty much everything now has RGB lighting, manufacturers are looking for new ways to make their products light up even more. And so it happens that we find more and more small displays in hardware. Today we take a look at Corsair’s new AiO water cooler, which also features a circular screen.

Packaging and scope of delivery

Once again, an almost completely black cardboard box with small yellow accents from Corsair awaits us, the large product image on the front and sides may not be missing, of course. The back then provides information about the features of this AiO, especially the display’s functionalities are touted.

The box is much more dreary when opened, but that’s nothing new. The usual mix of cardboard casing and plastic bags.

The included accessories are also mostly made of what can be seen over and over again. Various brackets, spacers and screws. However, the Y-cable for the internal USB port is interesting!

This AiO needs one connector for the included fan/RGB hub and another one only for the IPS LCD display. Since most boards only have two internal 2.0 ports, if any, you don’t block potential front ports on the case or other internal uses thanks to the splitter. Good thinking, Corsair! Criticism follows directly: Why is there no tube of thermal paste included in a high-end cooler?

 

Assembly and installation

First, the two matching brackets for the base are inserted into the side of the pump block. Afterwards, the plastic bracket pre-installed on AM4 mainboards has to be removed, and four spacers are screwed into the existing backplate.

Source: Corsair

After the pump block has been placed on the CPU, it is fixed with four thumbscrews. Then it’s time to lay the cable and connect the included controller hub.

 

Specifications

Below is an overview of the technical details, more information is available on the product page from the manufacturer.

 

 

Kommentar

Lade neue Kommentare

Tim Kutzner

Moderator

789 Kommentare 635 Likes

Ich warte ja nur darauf, dass ein Hersteller sich das 4K Display aus einer Smartwatch klaut und auf eine AiO klebt :D

Antwort 2 Likes

P
Phoenixxl

Veteran

156 Kommentare 118 Likes

Wenn der CPU Kühler mehr kostet als die CPU...
Ich glaube die Gewinnspanne ist bei so einem Produkt GEWALTIG.

Alleine schon, dass ein Lüfter 30€ kostet...unglaublich.

Antwort Gefällt mir

Haru

Veteran

115 Kommentare 65 Likes

Ich hatte die Capellix Elite und die Pumpe war eher eine der Sorte "Ohren betäubend".

Hat Corsair da nun ne neue Pumpe verbaut oder ist das die gleiche?

Auf langsam ist die in nem stillen Raum eigentlich deutlich nervig rauszuhören. Der Unterschied beim Empfinden verwirrt mich doch schon immer wieder.. 😅

Ich würd mir nie wieder irgendeine Corsair-AiO kaufen.

In Zukunft wünsche ich mir (besonders im Bezug auf die Pumpen bei einer AiO) noch ne subjektive Einschätzung bzgl. Lautstärkelevel, da allein der Schalldruckpegel keine wirklich gute Aussage ermöglicht. Störgeräusche von Lüftern fallen da im Graphen bspw. gern mal nicht auf, obwohl sie ein laut Graph eigentlich leiseres Produkt schnell mal deutlich lauter machen.

Antwort Gefällt mir

Tim Kutzner

Moderator

789 Kommentare 635 Likes

Die hatte ich auch im Test:

Und kann ich bestätigen, die Pumpe ist mega laut bei der Capellix. Hier deutlich leiser!

Antwort 1 Like

Klicke zum Ausklappem
Atze Wellblech

Veteran

105 Kommentare 18 Likes

Die Elite Capellix hatte ich auch, ging zurück wegen Ohrenschmerzen.
Bin vorsichtig geworden was Corsairs AIO`s angeht. Mehrere verbaut in den letzten 3 Jahren, alle irgendwie nicht so ganz zufriedenstellend.
Außer die Optik :) - aber die kühlt leider nicht

Antwort 1 Like

garfield36

Urgestein

1,270 Kommentare 331 Likes

Angeblich soll ja die NZXT Kraken X73 RGB sehr leise sein, und das bei guter Kühlleistung. In Schwarz ist sie etwas billiger.

Antwort Gefällt mir

Klicke zum Ausklappem

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Tim Kutzner

Supporting force on cooler, periphery and 3D printing arcticles.
Linux novice and wanna-be datahorder with DIY NAS.

Werbung

Werbung