Cooling Fans Reviews

Alphacool Rise Aurora 120 mm ARGB fan – A surprise with extremely high throughput and acoustic restraint

Disclaimer: The following article is machine translated from the original German, and has not been edited or checked for errors. Thank you for understanding!

Fan measurement chamber and claim

And since there is currently no source that offers realistic and usable data, even in comparison, we have invested a lot of time and money and simply developed our own fan measuring station with the advice of a cooling unit manufacturer and then calibrated it. Here the colleague Pascal Mouchel has done a great job and the result as the model “Sarcophagus I” can be seen in the meantime. The heavy and solid body made of thick MDF boards is screwed, glued and sound-insulated. How it all works and what we can and cannot measure in the end, you will learn in this article.

By now most of it has materialized really nicely, also with a lot of good feedback from the community and technical help from some industry partners. Of course, what we can measure from now on only meets semi-professional requirements, even though all measuring instruments have been calibrated in an elaborate and cost-intensive way. But that’s enough for all areas of what concerns the PC self-construction and -conversion. Of course, we are not a standardization company or the TÜV, but we try to measure everything as accurately as possible, which still remains within a reasonably affordable range.

 

Measuring chamber with sound level control (measurement takes place separately)

 

Tests as case fan and on radiators

Currently, there is always the question of what characteristics such a 120 or 140 mm fan really has. Not every model is suitable for all radiator thicknesses and many a supposed powerhouse loses so much pressure on radiators that it can hardly be called suitable. The data on volume flow (“throughput”) and static pressure in the data sheets are of no help if something works well on a slim radiator and fails completely on a 45 mm radiator.

In the picture we can see the middle partition between the two chambers, which supports the fan and also the radiator. Decoupling is of course very important, and we were fortunate to have expert help in calculating the volume for the chambers. Each of the chambers is also expediently lined with nubby foam and designed in terms of material technology so that there are hardly any disturbing influences.

The “honeycomb” behind the fan was recommended to us by Black Noise and the cooling manufacturer. This means that all coolers are equally well integrated, because each has a different exit angle and this is exactly what can be compensated for. However, due to the honeycomb, there is no tear-off edge and the airflow is directed directly to the outlet.

Radiators and fans are decoupled and screwed down with their own clamping device. On the picture you can see very nicely the improvised clamp with thick washers and insulation material as a base. The control is done by an Aquaero from Aqua Computer, which we bought, so we can control and test the fans by voltage (DC) or by PWM. Both are needed, because many fans, some people don’t know, can’t be brought to the lower and upper limits of the speed range with pure voltage regulation and also show other anomalies, about which we will write something at the appropriate place.

Volume flow

We measure the volume flow at the outlet of the second chamber where the air is blown out. This range is covered relatively accurately by comparative measurements in the measurement set-up of the refrigeration partner, so that our testo 410i now delivers quite reliable results to the electronic measurement data acquisition, which correspond quite well with the reference data of the professional measurement. What is important here is not the price of the equipment, but the appropriate positioning and the exact calibration with series of comparative measurements.

Static pressure

The measurement of the static pressure is carried out as usual as a differential pressure measurement. For this purpose, the special “bowl” is clamped on so that it closes airtight. Here too, of course, measurements were taken with borrowed, professional equipment and time-consuming calibrations were carried out. For this measurement we also use the 510i, a device we purchased ourselves from testo, and also collect the data wirelessly.

Noise emission

Measuring the noise level is a bit tricky, but works quite well in the evening hours at the measurement location. We decided to use dBA or dBC because values below one sone can hardly be measured reliably with still affordable and calibrated equipment and the software conversions of various software programs tend to confuse and become inaccurate in this low range. I’d rather use dBA then, especially since most people can do something with it. The measuring distance is 50 cm from the centre axis of the fan inlet.

We take two approaches to these measurements. For quick and plausibility tests we use a Voltcraft SL 451, which we calibrated according to ISO and whose microphone we placed decoupled from the body. The data acquisition takes place outside the measuring chamber. The Voltcraft SL 451 was kindly and uncomplicatedly provided to us by Conrad Elektronik. It is also the only component not acquired by ourselves. All other measuring instruments including accessories and electronics were purchased by us or provided from private stocks.

Our own purchases include a calibrated measurement microphone with XLR connector and low-noise USB interface. Measurements are taken in the evening and night hours in rural areas, so that one can already be quite satisfied with a basic level of below 26 dB(A). Since everything will be above this anyway during the measurement setup with a distance of 50 cm, this should not be a problem.

We also took the feedback from the community and evaluated the frequency band for each measurement, so you not only get the SPL values (sound pressure) in dB(A), but also a nice frequency analysis that helps to describe the sound character perfectly. Bearing or motor noise, vibrations or the tearing noise on the rotor – everything becomes mercilessly visible.

We will not go into certain details and approaches in this article, because there is still some foreign know-how in this structure and some things would probably be too far for the normal consumer. If you are interested and would like to build something like this, you are of course welcome to contact us. This also applies to all those who would like to contribute suggestions and tips, because we are still at the very beginning and can still correct or expand.

What we measure and how the result looks like, you can see on the next page by means of an exemplary selected fan, which however is anything but our reference. That’s exactly what we are still looking for 🙂

Test setup  
Housing / measuring chamber Two-chamber measuring set-up with sound insulation, fully air-conditioned room
Volume flow and flow velocity testo 410i (calibrated)
Differential pressure measurement testo 510i (calibrated)
Sound level measurement Measuring microphone Class 2 and USB interface, Smaart 7, Voltcraft SL 451 (Conrad, permanent rental, calibrated),
Speed control and fan control Aqua Computer Aquaero 6 Pro
Commissioning March / April 2021

 

Kommentar

Lade neue Kommentare

Tim Kutzner

Moderator

799 Kommentare 641 Likes

16 Euro sind Mittelklasse-Preise bei Lüftern?
Aber auch nur, wenn man sonst nur eLoop oder Noctua kauft :D

Aber zumindest taugt er was und sieht auch noch ganz schick aus

Antwort Gefällt mir

Igor Wallossek

1

10,107 Kommentare 18,596 Likes

Der Corsair kostet doppelt so viel. Mittelklasse sehe ich zwischen 10 und 20 Euro.
ARGB unter 15 Euro mit solchen Daten? Such mal :D

Antwort 1 Like

Tim Kutzner

Moderator

799 Kommentare 641 Likes
J
Javeran

Mitglied

16 Kommentare 4 Likes

Danke für den Test. Hätte ehrlich gesagt nicht gedacht dass der Lüfter so gut performt, doppelten Dank für die Erleuchtung.

@Igor Wallossek besteht die Chance auf einen Test des "Wunderlüfters" von Asus den XF120?

Antwort Gefällt mir

Igor Wallossek

1

10,107 Kommentare 18,596 Likes

Wenn die uns einen schicken, gern. MSI habe ich schon angebohrt :)

Antwort Gefällt mir

Opa-Chris

Mitglied

82 Kommentare 118 Likes

Gefunden!

Wobei der Arctic bei 500rpm und 1000rpm bei leicht mehr (Gehäuselüfter) oder gleich bis leicht weniger (Radiator) Durchsatz deutlich leiser ist. Und günstiger ist er auch noch.....und mehr Garantie....und ich bin einfach zufrieden mit dem. :LOL:

Der Wechsel vom Alphacool Eiszyklon Aurora LUX PRO 2 Digital RGB zum Arctic P12 PWM PST A-RGB war wirklich ein krasser Sprung, was Durchsatz und Lautstärke betrifft. Kann ich wirklich nur weiterempfehlen....

Antwort Gefällt mir

g
gerTHW84

Veteran

409 Kommentare 248 Likes

Sind die Lüfter von BlackNoise noch ein Thema? Die haben doch mal vor ein paar Jahren Wellen geschlagen, weil sie vermeintlich das Lüfterrad neu erfunden haben wollen?

Antwort Gefällt mir

Martin Gut

Urgestein

7,721 Kommentare 3,538 Likes

Einen 12er und einen 14er hat Pascal bereits getestet:

Mich würden aber auch noch die langsameren Modelle interessieren, weil man damit wirklich lautlose PCs bauen kann. In meinem werkeln 3 B14-1.

Antwort 2 Likes

Klicke zum Ausklappem
Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

Ich hab noch welche von NB da das dürften genau die sein die du meinst.
Ich schau mal welche ich habe und ich teste ja alles was ich in meinem Großen Schrank der Lüfter so habe.
Da liegen noch Lüfter im 3 Stelligen Bereich die ich alle testen muss. Dann gibt's auch eine ordentliche Datenbank für euch wir sind schon dran das das in Zukunft für euch bereitsteht.

Antwort 3 Likes

RX480

Urgestein

1,803 Kommentare 820 Likes

Derselbe Humbug wie beim letzten Test!

Für highPressure-Push am Radi nimmt man net den A12 sondern den P12.
Der A12 macht nur Sinn als zusätzlicher Pull.

Da braucht ein intelligenter Mensch net mal testen, sondern nur die Datasheets anschauen.
(2,34 vs 2,83 mmH₂O)

Antwort Gefällt mir

Klicke zum Ausklappem
Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

Was heißt hier Humbug dann geh bitte zu Noctua und sag ihnen das ihr NF A 12 völlig Sinnlos ist für Radiator weil genau so wird er auch verkauft und genau so kaufen ihn viele als Radiator Lüfter denn dieser war als erstes da und wird überall als Referenz genommen.

Und es gibt schon einen Grund warum mehr und mehr Hersteller diese Blattform nehmen.

Antwort Gefällt mir

RX480

Urgestein

1,803 Kommentare 820 Likes

Und warum gibts dann überhaupt den P12?

da würde ich maximal vermuten, das überteuerte A12 an den Mann gebracht werden sollen
... von unwissenden Marketingleuten bei Noctua, verzapft

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

wir haben eben verschiedene Radiator Größen/ Dicke wenn ich jetzt von Anfang an weiß ich werde einen 60er Radiator verwenden sollte ich vielleicht einen Lüfter nehmen mit mehr Druck der NF A 12 ist aber ein Allrounder und deswegen ist der die Referenz.

Antwort Gefällt mir

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

daher direkt rufen Humbug ist Fail weil wir machen uns schon Gedanken welcher Lüfter als Referenz passt deswegen wurde bei der 140er Reihe der FLX vom NB abgelöst. Weil es da einfach mehr Sinn macht und bei 120er macht es Sinn einen Allrounder zu testen der sowohl als Case und Radiator Lüfter gut performt und dazu noch eine vergleichbare Drehzahl hat mit anderen und die liegt bei um die 2000 RPM.

Das es dann so Hornissen gibt wie der Rise der über 2500 macht ist dann etwas anderes aber denk mal logisch nach macht es jetzt Sinn einen Lüfter mit 1700 antreten zu lassen gegen die meisten die 2000+ machen? ich glaube nicht.

Da braucht ein intelligenter Mensch net mal testen, sondern nur die Datasheets anschauen.
(2,34 vs 2,83 mmH₂O)

Solche Aussagen sollte man dann einfach lassen weil wir schon wissen was wir tun
Und unsere Tests haben wohl eindeutig gezeigt das Datasheets nix zu sagen haben oder irre ich mich?

Antwort 1 Like

J
Javeran

Mitglied

16 Kommentare 4 Likes

Wie sich der P12 redux 1700 PWM schlägt wäre aber trotzdem mal interessant. Der hat auch schon ein paar Jahre auf dem Buckel und ist doch relativ günstig zu haben.

Antwort 1 Like

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

auch diesen hab ich da liegen ich versuch immer eine Mischung zu machen mal 140 mal 120 und manchmal kommen neue Lüfter raus die unbedingt getestet werden müssen da sie wie z.b jetzt der Rise rausstechen. :) ihr bekommt alle das was ihr wollt :D

Antwort 2 Likes

w
wontiii

Neuling

5 Kommentare 1 Likes

gibts nur noch den Arctic, welcher für mich im 1000RPM Bereich besser performt...wohl gemerkt auf einer Mora.
Hatte die Corsiar QL120, NB eloopX und zu guter letzt die Alpha Cool.

Die Arctic laufen einfach am stabilsten in Sachen Geräuschkulisse (niedrige Frequenz) und vor allem die Stabilität des Korpus waren hier deutlich besser, in meinem Use Case.

Antwort 1 Like

RAZORLIGHT

Veteran

354 Kommentare 260 Likes

Ähm steh ich auf dem Schlauch?
Das betrifft doch die Merhheit der Radiatoren, der kommt in den Deckel und die Lüfter hängen ausblasend dran.
Sollte das Probleme bei einem Radiatorlüfter machen wäre das mMn. ein Designfehler.

Dennoch interessante Lüfter, leider musste Alphacool bei dem RGB Anschluss wieder ein eigenes Süppchen kochen.

Antwort 1 Like

Pascal TM-Custom

Urgestein

1,122 Kommentare 1,358 Likes

es ist tatsächlich so das es Lüfter gibt die das über Kopf verbauen nicht so mögen und dort ein klackern auftauchen kann oder andere Geräusche ich hatte mal Cooler Master mir ist jetzt nur nicht mehr bekannt welche das waren die haben im Normalen verbau sprich Senkrecht bestens funktioniert oben im Deckel aber haben die geklackert.

Es kommt auf das Lager drauf an.

mit dem RGB Anschluss joar Corsair,TT usw sind da net anders Alphacool hat bei ihren Produkten wie Eisbär usw diese Adapter dabei liegen nur nicht bei Einzellüfter. Das gute ist man kann die Lüfter Kaskadieren also muss man nur 1 Adapter kaufen. Klar man könnte es wie NB machen und zu jedem Lüfter einen beilegen aber ist das Umweltfreundlich? 1er wird benötigt und rest kommt in Müll.

Aber das kann jeder sehen wie er will :)

Antwort 1 Like

Danke für die Spende



Du fandest, der Beitrag war interessant und möchtest uns unterstützen? Klasse!

Hier erfährst Du, wie: Hier spenden.

Hier kannst Du per PayPal spenden.

About the author

Review Team

Werbung

Werbung