Volume flow (throughput) in m³h
The black bar is the specification from the data sheet, which we check with at this point. Let’s start with the value for m3 per hour, which is more common in Germany, and compare the individual installation variants from pure case fans to use on 60 mm radiators. You can see that the Alpenföhn Wing Boost 3 PWM 140mm slightly misses the targets even in an open setup and without radiators, so the counter test without honeycomb didn’t help either, because then the values were partly even lower. The tests at 500 rpm were feasible, but they also show that the Alpenföhn Wing Boost 3 PWM 140mm is not suitable for radiators. Even more so when the already low revs are slowed down even further.
Volume flow (throughput) in cfm
The whole thing again in cfm. However, since only the unit of measurement changes, what has already been said for the airflow applies to the same extent.
57 Antworten
Kommentar
Lade neue Kommentare
Veteran
1
Veteran
Mitglied
Urgestein
Mitglied
Urgestein
Urgestein
Neuling
Veteran
Mitglied
1
Veteran
1
Urgestein
Veteran
1
Neuling
1
Alle Kommentare lesen unter igor´sLAB Community →