Hi!
I've bought a brand new XFX 5700XT Triple dissipation VGA. My problem is that when i adjust TDP it force limit GPU frequency a lot. I have about 800Mhz maximum @ TDP -40 which limit ETH hashrate to 34Mh/s. I cannot manually make frequencies higher. (If I set TDP to -28, Frew will be about 1200Mhz, which gives me good hasrate but with powerconsuption of 120W.)
With My Sapphire 5700Xt there is no such problem. I can set -40TDP and GPU freq to 1200Mhz, no problem at all.
After i inspected MorePowerTool i found tab of AVFS (GHZ --> V) I think this could solve my problem, but i would need an adivce how to use it properly.
Thanks,
I've bought a brand new XFX 5700XT Triple dissipation VGA. My problem is that when i adjust TDP it force limit GPU frequency a lot. I have about 800Mhz maximum @ TDP -40 which limit ETH hashrate to 34Mh/s. I cannot manually make frequencies higher. (If I set TDP to -28, Frew will be about 1200Mhz, which gives me good hasrate but with powerconsuption of 120W.)
With My Sapphire 5700Xt there is no such problem. I can set -40TDP and GPU freq to 1200Mhz, no problem at all.
After i inspected MorePowerTool i found tab of AVFS (GHZ --> V) I think this could solve my problem, but i would need an adivce how to use it properly.
Thanks,