Question GIGABYTE 5700 XT Bios mod fails

A

AlleyCat

Veteran
Mitglied seit
Okt 9, 2020
Beiträge
290
Bewertungspunkte
17
Punkte
17
Hi,
I am failing to update Gigabyte 5700 XT. The same procedure updates the BIOS on MSI cards with no problem. I follow the instructions on Igors Lab.

The sign of having trouble with the card bios flash shows in GPU-Z. After flash using amdvbflash the values of GPU and memory frequencies is empty. With stock bios there are Mhz frequencies.

Is there any known problems with flashing Gigabyte cards?
Any suggestions on what other forums I may ask for assistance?
Is it possible that the OEM bios is signed, and any modified bios will be rejected?
If the bios is signed, any tools to resign, or would I need to buy a card from a different vendor?

Thanks,

Alley Cat
 
Zuletzt bearbeitet :
Sortiere nach Datum Sortiere nach Stimmen
@Joberor
Thank you very much. But how can i flash .. i canot even save the org bios anymore
293+ or 304+ gives errors..also rom size i think is wrong on both
afraid if i brick the card .. .any idead suggestions?
Thank you!
 

Anhänge

  • xfx293+.PNG
    xfx293+.PNG
    9,1 KB · Aufrufe : 36
  • xfx304+2ndtry.PNG
    xfx304+2ndtry.PNG
    13,5 KB · Aufrufe : 44
Upvote 0 Downvote
Hello! I was trying to flash an 5700 XT Gigabyte OC 8 Gb Rev 2.0 with the original bios + mods on RED. But it seems that the BIOS is locked / was not signed and now I'm now able to get it up again. Any suggestion? I do have a backup of the original bios (see attached) and I can say that it has Samsung chip! Thanks.

I would like to unbrick it and also bios mod it. So that I can mine better. Thanks!
 

Anhänge

  • f7b8b87d-f19a-4b5f-9cbb-e42d471bf4ae.rom
    1 MB · Aufrufe : 9
Upvote 0 Downvote
okorn hat gesagt. :
Hello! I was trying to flash an 5700 XT Gigabyte OC 8 Gb Rev 2.0 with the original bios + mods on RED. But it seems that the BIOS is locked / was not signed and now I'm now able to get it up again. Any suggestion? I do have a backup of the original bios (see attached) and I can say that it has Samsung chip! Thanks.

I would like to unbrick it and also bios mod it. So that I can mine better. Thanks!
Zum Vergrößern anklicken....
I think there are some post how to do on the forum, try to find. I never done.
 
Upvote 0 Downvote
hi!
what is the best mining software for this type of GPU's?
I have gigabyte 5700xt bios mod and I am a newbie and I am starting with Lolminer
 
Upvote 0 Downvote
Mini_Me hat gesagt. :
Yes.
Zum Vergrößern anklicken....
Hi Mini Me, i tried the BIOS on a Gigabyte_gaming and i'm getting some errors.
Do you know what i'm doing wrong?

amdvbflash_windows>amdvbflash -p 0 MOD-Micron-FZ0-Gigabyte-Gaming-RX57XT-v68.rom
AMDVBFLASH version 3.04+EXTERNAL, Copyright (c) 2019 Advanced Micro Devices, Inc.

Old SSID: 2313
New SSID: 2321
SSID mismatched

ERROR: 0FL01
 
Upvote 0 Downvote
d3nnisc hat gesagt. :
Hi Mini Me, i tried the BIOS on a Gigabyte_gaming and i'm getting some errors.
Do you know what i'm doing wrong?

amdvbflash_windows>amdvbflash -p 0 MOD-Micron-FZ0-Gigabyte-Gaming-RX57XT-v68.rom
AMDVBFLASH version 3.04+EXTERNAL, Copyright (c) 2019 Advanced Micro Devices, Inc.

Old SSID: 2313
New SSID: 2321
SSID mismatched

ERROR: 0FL01
Zum Vergrößern anklicken....

FIXED!
 
Upvote 0 Downvote
I get all my gigabyte cards below 100w excerpt one, a Gigabyte_aorus_rev1 it runs at 110w.
do you have a good bios for this?
 
Upvote 0 Downvote
Upvote 0 Downvote
Hello friends, does anyone have a BIOS unlock this card?
Memory is Samsung graphics
I put the original BIOS
 

Anhänge

  • WhatsApp Image 2021-02-07 at 1.22.36 AM.jpeg
    WhatsApp Image 2021-02-07 at 1.22.36 AM.jpeg
    176,6 KB · Aufrufe : 34
  • ETH01-2-RadeonRX5700XT-8G-Samsung_GDDR6-xxx-xxx-xxx.rom
    1 MB · Aufrufe : 8
Upvote 0 Downvote
Upvote 0 Downvote
AndSer hat gesagt. :
Hey,
I can see from the screenshot that you are using 113-MSITV381MH.103 vBIOS which is based on 017.001.000.068.000000 core release. I wrote a short summary about it in this response. With all MECH's my choice is 113-MSITV381MH.102 as a base for modding:

Anhang anzeigen 10859

Unlike few posters, whose energy cost is next to nothing, I'm constricted with high electricity prices hence differentiate from recommendations focusing on the power draw sweet spot with further TDP adjustments.

Regards,
Andy
Zum Vergrößern anklicken....
Hello Andy,

Kind regard and thank you for your help on MSI. I tried the 102 bios and was able to get close to my goal but no where near what you were able to achieve. I tried your numbers above and crashed pretty quickly. So I tested several sets of numbers and these are were I ended.

Interesting, that this is the most stable, but either one GPU0 or 1, will crash between 2 and 15 hours. Usually the GPU goes to 0 Mh and then the miner reboots. No invalids or anything like that are reported.

In the screen, GPU 0 has has 102 bios + Power settings + appl straps and timings. GPU1 has 102 bios but no other mods. I am unable to get beyond 52 Mh on GPU0.

1613264026620.png

Any chance you could share your 102 mod bios?

Thanks J
 
Upvote 0 Downvote
JR-AG hat gesagt. :
Hello Andy,

Kind regard and thank you for your help on MSI. I tried the 102 bios and was able to get close to my goal but no where near what you were able to achieve. I tried your numbers above and crashed pretty quickly. So I tested several sets of numbers and these are were I ended.

Interesting, that this is the most stable, but either one GPU0 or 1, will crash between 2 and 15 hours. Usually the GPU goes to 0 Mh and then the miner reboots. No invalids or anything like that are reported.

In the screen, GPU 0 has has 102 bios + Power settings + appl straps and timings. GPU1 has 102 bios but no other mods. I am unable to get beyond 52 Mh on GPU0.

Anhang anzeigen 11149

Any chance you could share your 102 mod bios?

Thanks J
Zum Vergrößern anklicken....
Hey J,

You are welcome. I had to split this post since responses are limited to five attachments only.
I noticed that the temperature on your GPUs is relatively high in relation to your power input.

Key to the attached vBIOS:
B049 - 017.001.000.049.000000
M1 - Memory Timing Control: 1
F0/1 - Fan control ZeroRPM (0 -OFF; 1 -ON)
AS - AppleStraps
UB - User straps iteration series B (A is useless)
RXX - release

Regards,
Andy
 

Anhänge

  • B049_M1_F1_AS_R20.rom
    1 MB · Aufrufe : 4
  • B049_M1_F0_UB_R21.rom
    1 MB · Aufrufe : 1
  • B049_M1_F1_UB_R21.rom
    1 MB · Aufrufe : 1
  • B049_M1_F1_AS_R21.rom
    1 MB · Aufrufe : 1
  • B049_M1_F0_AS_R21.rom
    1 MB · Aufrufe : 1
Zuletzt bearbeitet :
Upvote 0 Downvote
JR-AG hat gesagt. :
Hello Andy,

Kind regard and thank you for your help on MSI. I tried the 102 bios and was able to get close to my goal but no where near what you were able to achieve. I tried your numbers above and crashed pretty quickly. So I tested several sets of numbers and these are were I ended.

Interesting, that this is the most stable, but either one GPU0 or 1, will crash between 2 and 15 hours. Usually the GPU goes to 0 Mh and then the miner reboots. No invalids or anything like that are reported.

In the screen, GPU 0 has has 102 bios + Power settings + appl straps and timings. GPU1 has 102 bios but no other mods. I am unable to get beyond 52 Mh on GPU0.

Anhang anzeigen 11149

Any chance you could share your 102 mod bios?

Thanks J
Zum Vergrößern anklicken....
Hey J,

I have a test rig with "bad silicone" GPUs which were throwing "Dead GPU" in TRM. The debug log shows that they are not doing GPU recovery on DRM failure. This seems to be kernel not playing nicely.
Bad silicone:

Screenshot from 2021-02-14 10-27-02.png

Good silicone:

Screenshot from 2021-02-14 10-26-41.png

All have set:

Screenshot from 2021-02-14 10-28-28.png

Extra params - _TDP_TDCGFX_TDCSOC (for power sweet spot).

All production GPUs are on B049_M1_F1_AS_R21_135_115_12.rom

Regards,
Andy
 

Anhänge

  • B049_M1_F1_AS_R21_135_115_12.rom
    1 MB · Aufrufe : 10
  • B049_M1_F1_AS_R21_140_126_12.rom
    1 MB · Aufrufe : 9
Zuletzt bearbeitet :
Upvote 0 Downvote
Um antworten zu können musst du eingeloggt sein.
Oben Unten