AMD MorePowerTool - AMD Radeon RX 5700 und RX 5700 XT Tweaking- und Übertaktungssoftware | Download

Igor Wallossek

Format©
Mitarbeiter
Mitglied seit
Jun 1, 2018
Beiträge
10.107
Bewertungspunkte
18.596
Punkte
114
Alter
59
Standort
Labor
The English version can be found here!

Das MorePowerTool für die AMD Radeon RX 5700 und RX 5700 XT

Wir freuen uns, dass unser Community-Mitglied hellm das Software MorePowerTool (kurz MPT) für das Release fertiggestellt hat und wir diese Software hier auf unserer RTG-Seite auch exklusiv zum Download anbieten, sowie im Forum auch den direkten Support dazu anbieten können. Für die Installation und Anwendung der Software gilt es jedoch unbedingt ein paar Hinweise und Regeln zu befolgen, die wir unserer Anleitung und dem Download voranstellen möchten.





>>> Hier klicken für den Original-Beitrag <<<
 
@mtrai
Wow ... Dein GPU-Score in TimeSpy ist sogar 10.385 Punkte. Glückwunsch - das ist Oberliga.
Der maximale Takt Deiner RX 5700 XT ist mit 2171 MHz sehr hoch -> rekordverdächtig. (y)
In Firestrike enorme 2204 MHz. 😮

Ist die Grafikkarte wassergekühlt?
Was hast Du im MorePowerTool eingestellt um so einen hohen Boosttakt zu erreichen?

Grüße, TM
 
[QUOTE = "Dance musician, post: 48288, member: 2911"]
[USER = 3532] [USER = 3532] [USER = 3532] @mtrai [/ USER] [/ USER] [/ USER]
Wow ... your GPU score in TimeSpy is even 10,385 points. Congratulations - that's Oberliga.
The maximum clock of your RX 5700 XT is very high at 2171 MHz -> record-breaking. (Y)
In Firestrike enormous 2204 MHz. 😮

Is the graphics card water-cooled?
What have you set in the MorePowerTool to achieve such a high boost?

Regards, TM
[/ QUOTE]

Thanks I do try. I spend time overclocking then take time away from my PC or overclocking.

Yes full waterblock with separate loop. I try different settings but I do push my voltage since I am under a full waterblock. I also have access to a number of other tools to make other adjustments as well.

I am most active on guru3d and overclock.net with the same user name and occasionally post on reddit as well. Gonna try to be a bit more active here as well. I am pretty well known on those 2 sites for my overclocking skills. But I have to admit I have more time then most to change settings and test since I am disabled and home with my dogs pretty much 24/7
 
Zuletzt bearbeitet :
Which of these do get more attention, computer or dogs? :D

I do not have that much time to test tweak that much. Would have to take a day or two off to do it. Which I will eventually do, because I still want to do some testing regarding cpu load PCIe 3.0 vs 4.0 on a riser cable, is my vram memory overclock already hurting performance etc.

Could as well push pretty good on my 5700xt, if the silicon is good. Have two 420 Mora's, one for the cpu part and the other soley for the GPU even tough they are not sperated loops.

What kind of tools do you have access to? development tools?
How high is your voltage?

Greetings, Alex
 
Mahlzeit,

habe vor knapp einer Woche meine 5700xt Nitro+ (standard edition) erhalten und der chip scheint ganz ordentlich zu sein.
1.1v und 2100mhz (wie gut?) realer boost. Also maxed out vom Chiptakt in Wattman.
Ich spiele mit dem Gedanken, etwas mit dem Powertool zu spielen.
Mal schauen.

mfg
 
Ein Moin als neues Forummitglied und gleich mal dumm gefragt:
Ich habe seit heute eine Sapphire RX 5700 XT Nitro eingebaut und dann per MPT und RBE mein Bios weitgehend auf die von Igor empfohlenen Energiesparwerte eingestellt (Power Limit GPU 180W und TDC Limit GFX 158A). Also erst geändert mit dem MPT, danach per RBE das GPU-BIOS "aktualisiert".
Danach sollte ich mir doch ein Flashen des geänderten BIOS ersparen können, oder liege ich da verkehrt?
 
Ja aber es ist komfortabler, da du dann auch nach Treiberupdates die Werte nicht neu laden musst.
 
Danke Gurdi fürs schnelle Antworten.
So lange ich noch nicht die richtige Einstellung gefunden habe, gehts aber auch so, wenn dann alle Werte langfristig stimmig sind, wird geflasht.
 
Jep, außerdem ist ein Flashvorgang immer potentiell gefährdet.

Gutes Daddeln damit!
 
Danke Gurdi fürs schnelle Antworten.
So lange ich noch nicht die richtige Einstellung gefunden habe, gehts aber auch so, wenn dann alle Werte langfristig stimmig sind, wird geflasht.

Genau so sollte man es machen, erst anständig austesten dann Flashen. Das schöne daran, du kannst so auch später mal deine Karte übertaktet abgeben.
 
Ändert MorePowerTool nur die Registrierung oder ändert es etwas auf der Karte und ich könnte die Garantie ungültig machen, wie beim Flashen des BIOS? Vielen Dank

Does MorePowerTool modify only the registry or does it modify something in the card and I could void the warranty, like with BIOS flashing? Thanks
 
MPT is only registry, no hardware changes. :)
 
[QUOTE = "Dance musician, post: 47107, member: 2911"]
Igor doesn't think much of VRAM undervolt, if I remember it correctly.
The undervolting of the GPU core is something else.

The RX 5000 models all run with auto mechanisms (greetings to the AI!), So you will find it difficult to force them into a tactical corset. Unless you dare to turn off & test these power saving features etc. with the latest MPT version!

Igor could surely add a brisk saying behind the picket fence ... umm from my hat ... : giggle:
[/ QUOTE]

Hello,

I would like to turn off and test performance with power saving features disabled using the latest MPT version. Can you please advise which features i need to disable via the PPT Table Features in the MPT.

Thank you
 
Break the Limis

Mal ne Devil unter Wasser :
 
Break the Limis

Mal ne Devil unter Wasser :

(y)
Welche Einstellungen hast du bei Vcore und Powertarget?
 
Nettes Ergebnis.
Darf ich fragen welche Temperaturen du auf Hotspot und Core dabei hast?
Und welcher Wasserblock?

Ich bin bei 1.2V schon auf 110 Grad Hotspot... Muss mal neu montieren, oder gibts da nen Tipp?

lg
 
Habe den ALC Kühler und Temps waren dank Flüssigmetall sehr niedrig . Gekühlt wird mit 2 x 480er 60mm Dicke . Und meine 7900x @ 5 Ghz hängt noch mit im Kreislauf
nach ca 1 Stunde Furmark
 
Oben Unten